Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase

Product Code:
2298
£47.94 £39.95

This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution).

It offers a holding torque of 850 g-cm (12 oz-in), and each phase draws 1 A at 3.5 V.

This stepper motor’s flat profile (18.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase Sanyo Pancake Stepper Motor: Bipolar, 42×11.6mm dimensions Sanyo bipolar stepper motor wiring diagram
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase

The motor has four colour-coded wires terminated with bare leads: red and yellow connect to one coil; orange and blue connect to the other.

Dimensions:

  • Size: 42 mm square × 11.6 mm, (not including the shaft)
  • Weight: 70 g (2.5 oz)
  • Shaft diameter: 5 mm

General Specification:

  • Shaft type: single shaft - length 5mm
  • Steps per revolution: 200
  • Current rating: 1A (per coil)
  • Voltage rating: 3.5 V
  • Holding torque: 850 g-cm (30 oz-in)
  • Resistance: 3.5 Ohm per coil
  • Inductance: 1.2 mH per coil
  • Number of leads: 4
  • Lead length: 30 cm (12″)
  • Output shaft supported by two ball bearings
Product Enquiry