3316
3316_0 PM21L-21-14 51g-cm Unipolar Stepper
£3.48 £2.90
This motor is good for turning small knobs, buttons, etc.
- Small Torque
- Step angle: 18°
- Holding Torque: 50 g-cm @ 0.08 Amp
- Step Angle 18°
- Step Accuracy 7%
- Holding Torque 50 g-cm / 0.69 oz-in
- Voltage 12V
- Rated Current 0.08A
- Shaft Diameter 1.5mm
- Weight 24g
- Number of Leads 6
Related Products
Check items to add to the cart or
The 3316 stepper motor connects to:
1062 - PhidgetStepper Unipolar 4-Motor
1063 - PhidgetStepper Bipolar 1-Motor
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
| Wire Color | Orange | Red | Yellow | Black | White | Brown |
| Board Connector | + | A | B | C | D | + |
To connect the motor to the 1063 simply leave out the Orange and Brown wires.
Note: Make sure to unplug the power cord from the controller board before switching wires around.
