Touch Wheel Phidget

Product Code:
HIN1001_0
£17.50 £14.58
  • Buy 5 for £15.82 £13.18 each and save 10%
  • Buy 10 for £14.87 £12.39 each and save 15%
  • Buy 25 for £13.96 £11.63 each and save 20%
  • Buy 50 for £13.54 £11.28 each and save 23%
  • Buy 100 for £12.25 £10.21 each and save 30%

Use this capacitive touch wheel and buttons as an intuitive user interface to your Phidgets system.

Need a user-friendly control panel for your Phidgets project? Look no further than the Touch Wheel Phidget. This user interface board uses capacitive touch technology, similar to the touchscreen on a smartphone. Capacitive touch sensors such as this can detect a touch through a piece of glass or plastic of up to 3mm thick, so you can hide this board inside an enclosure or behind a panel. The HIN1001 connects to a port on a VINT Hub.

Touch Wheel Phidget Touch Wheel Phidget Touch Wheel Phidget dimensions Touch Wheel Phidget Touch Wheel Phidget connected to HUB0000_0 Phidgets - HIN1001 Touch Wheel
Touch Wheel Phidget

This board has four touch buttons and one fully-functional scroll wheel pad. Whenever a button or the scroll wheel is initially touched, an event is fired in software, allowing you to react immediately to the change. The scroll wheel also generates an event whenever your finger's position changes as you slide it across the wheel. You can also adjust the sensitivity of the board to avoid missed touches or unintentional touches. 

 

Sensor Properties
Controlled By VINT
Detecting Distance Max 5 mm
Sampling Interval Min 20 ms/sample
Sampling Interval Max 250 ms/sample
Electrical Properties
Current Consumption Min 20 μA
Current Consumption Max 2 mA
Physical Properties
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

Sensitivity Settings

Sensitivity (0-1)Application0.8 - 1.0Behind up to 3mm of glass0.2Inside default enclosure

Product Enquiry