OUT1001_0

Isolated 12-bit Voltage Output Phidget

£36.72 £30.60

Produce a voltage from -10 to +10 volts with this isolated voltage output module.

Or

When you need to generate a voltage between -10 and +10 volts, this board will do the job. With a resolution of 4.9mV (12-bit) and current as high as 5mA, it is designed to interface with devices that are controlled by an analog voltage signal.

To use it, simply plug it into a VINT port and control the voltage with your program 

Selectable Voltage Range

Need higher resolution? The output on this Phidget also has a 0 to 5V terminal that can be used instead of the ±10 terminal, yielding a resolution of 1.2mV. Both terminals are controlled as the same object in software; they cannot be controlled separately.

Isolated for Stability

This board is electrically isolated from input to output, protecting your system fom instability caused by unintentional ground loops.

Board Properties

Controlled By

VINT

Electrical Properties

Current Consumption Min

35 mA

Current Consumption Max

85 mA

Voltage Outputs

Number of Voltage Outputs

1

Current Sourcing

varies*

Current Sinking

varies*

Voltage Outputs (±10V Mode)

Voltage Output Max

± 10 V DC

Output Voltage Resolution

(12-bit) 4.9 mV DC

Voltage Output Noise

± 500 μV DC

Voltage Outputs (5V Mode)

Voltage Output Max

5 V DC

Output Voltage Resolution

(12-bit) 1.2 mV DC

Voltage Output Noise

± 20 μV DC

Physical Properties

Recommended Wire Size

16 - 26 AWG

Operating Temperature Min

-40 °C

Operating Temperature Max

85 °C

* Current sourcing and sinking capability varies based on selected output voltage.