DCM4110_0 57DMWH75 NEMA23 Brushless Motor with 47:1 Gearbox, DCM4110_0

£131.78 £109.82

This 4-pole BLDC gear motor can output 102kg-cm of torque at speeds of up to 82 RPM. The shaft has a 4mm keyway for better coupling.


The DCM4110 is a 24 volt brushless DC motor, generating 100 Kg-cm of torque at 82 RPM. The shaft is equipped with a 4mm key to improve coupling.

Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 47:1 planetary gearbox on this motor results in higher torque at the cost of speed.

This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires.

This diagram shows how to connect the motor wires to the controller.

Note: Because of the way this motor is built, you'll need to set negative P, I and D values when using the MotorPositionController object.

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

Motor Properties

Motor Type

Brushless DC Motor

Number of Poles


Manufacturer Part Number


Output Power (Mechanical)

115 W

Rated Torque

102 kg·cm

Rated Speed

82 RPM

Electrical Properties

Rated Current

7 A

Rated Voltage

24 V DC

Coil Resistance

370 mΩ

Physical Properties

Shaft Diameter

12 mm

Mounting Plate Size


Operating Temperature Min

-20 °C

Operating Temperature Max

40 °C

Gearbox Properties

Gearbox Type

Planetary Gearbox

Gear Ratio

46 82/125 : 1