TMP1101_1

4x Thermocouple Phidget

£42.84 £35.70

Connect up to four K, J, E or T type thermocouples to this Phidget to measure the temperature of the air or an object.

Or

With this Phidget, you can connect up to four thermocouples to a single VINT port, making it ideal for temperature testing and comparison. You can use a J, K, E or T type thermocouple; set the appropriate type in software and it will convert sensor data into degrees Celsius automatically. If you have other thermocouple types, you can open the channel in VoltageInput mode and convert to temperature manually according to your thermocouple's datasheet.

One of the major advantages of using a thermocouple is the capability of using long wires. Thermocouples have been known to work with segments as long as 100m, while USB and other sensors suffer from voltage drops after 5 or 10m.  

Please note that the longer you make your thermocouple wires, the more likely it is that you'll experience noise and interference. For more information, see our document on Addressing Electromagnetic Interference.

 

Board

Controlled By

VINT

Number of Thermocouple Inputs

4

Thermocouple Input

Thermocouple Error Max (K-Type)

± 2 °C

Thermocouple Temperature Resolution (K-Type)

0.04 °C

Sampling Interval Min

100 ms/sample

Sampling Interval Max

60 s/sample

Thermocouple Voltage Resolution

1 μV DC

Onboard Temperature Sensor

Temperature Error Max

± 1 °C

Sampling Interval Max

60 s/sample

Sampling Interval Min

500 ms/sample

Temperature Error Typical (At 25°C)

± 0.25 °C

Temperature Resolution

0.063 °C

Temperature Max

85 °C

Temperature Min

-40 °C

Electrical Properties

Current Consumption Min

10 μA

Current Consumption Max

5 mA

Physical Properties

Recommended Wire Size

16 - 26 AWG

Operating Temperature Min

-40 °C

Operating Temperature Max

85 °C