32401

XBee 5V/3.3V Adapter Board

£17.65 £14.71
This low cost XBee 3.3-5V Adapter Board comes in partially assembled kit form and provides a cost-effective solution for interfacing your microcontroller to any XBee or XBee Pro module (see Associated Modules below). A voltage regulator and 74LVC244A buffer is included onboard for safe interfacing to a 5 V supply, allowing for easy compatibility with any Parallax microcontroller.
Or

A USB version XBee USB Adapter Board (#32400) and non-USB version of the XBee Adapter Board (#32403) are also available.

Dimensions: 38.3 x 25.6 x 14.8mm when headers are attached

 

Features:

  • Onboard 3.3 V regulator and 5 V to 3.3 V logic converters 
  • Four status indicator LEDs for Power, RSSI, Associate, and mode (sleep/ON) 
  • Converts XBee 2mm pin spacing to breadboard friendly 0.1" spacing 
  • Provides easy pluggable wire or solder connections 
  • Pin out compatible with other XBee Adapter Boards 
  • Partially assembled kit form for flexible configuration 
  • Compatible with all Parallax 3.3 V and 5 V microcontrollers 

 

Kit Contents:

  • (1) XBee 5V/3.3V Adapter PCB 
  • (2) 10-pin 2mm sockets 
  • (1) 40-pin SIP header 

Tools Required:

  • Soldering iron 
  • Solder 
  • Flux 
  • Diagonal cutter or hobby knife 

 

Associated Modules:

  • XBee 2mW Chip Antenna (XB24-ACI-001) 
  • XBee 2mW Wire Antenna (XB24-AWI-001) 
  • XBee Pro 60mW Chip Antenna (XBP24-ACI-001) 
  • XBee Pro 60mW Wire Antenna (XBP24-AWI-001)
  • Power requirements: 3.3-5 VDC
  • Communication: Serial pass-through to XBee module
  • Dimensions: 38.3 x 25.6 x 14.8mm when headers are attached
  • Operating temp range: -40 to +70 ┬░C