Roboclaw Solo 300A, 60VDC Motor Controller
- 300 Amps Continuous
- Aluminium Case
- Encoders Supported
- Position Control
- Autotuning PID
- Multimode Control Interface
- USB, Serial, R/C, Analog Inputs
- Limit, Home and E-Stops
- Up to 60VDC Operation
The RoboClaw Solo 300A is an intelligent motor controller designed to control one brushed DC motors at 300 Amps continuous. It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi.
RoboClaw automatically supports 3.3V or 5V logic levels, travel limit switches, home switches, emergency stop switches, power supplies, braking systems and contactors. Power supplies can be used by enabling the built in voltage clamping control feature. A built-in switching mode BEC supplies 5VDC at up to 1.2 Amps for powering user devices.
Brushed DC motors can be controlled in open or closed loop using position or velocity control modes. RoboClaw features several built-in commands for controlling acceleration, deceleration, distance, speed, current sense, voltage limits and more. RC and analog control modes also include several user defined settings such as acceleration and decelerate speeds.
Quadrature encoders with up to 19.6 million pulses per second are supported and can be auto tuned using Motion Studio which is a free downloadable application. In addition, a wide range of sensor inputs including potentiometers and absolute encoders are supported. RoboClaw's closed loop functionality creates absolute control over speed, velocity and direction regardless of load changes.
RoboClaw incorporates several protection features including temperature, current, over voltage and under voltage limits. The protection features are self monitoring and protect RoboClaw from damage in any operating condition. Several user definable settings such as maximum current limit, maximum and minimum battery voltages are provided for more refined control.
RoboClaw's regenerative capabilities will charge a supply battery during slow down or breaking. It's advance circuitry can change direction during full throttle without damage! RoboClaw also incorporates a LiPo cutoff mode to prevent battery damage.
|Peak Current per Channel||300A|
|Continuous Current per Channel||300A|
|Max Voltage||60 VDC|
|BEC||5 VDC @ 1.2A|
|3.3V Safe Outputs||Yes|
|5V Tolerant Inputs||Yes|
|Encoder Auto Tune||Yes|
|User Selectable Peak Current||Yes|
|Over Voltage Protection||Yes|
|Under Voltage Protection||Yes|
|Position Control Mode||Yes|
|Velocity Control Mode||Yes|
|Motor Type||Brushed DC|
|Dimensions||L. 99mm x W. 72.6mm x H. 30mm|
- Quick Start Guide
- USB Driver and BasicMicro Motion Studio Installation
- RoboClaw Basics
- Motor Controller Hardware Precautions
- Layout and Common Operations in Motion Studio
- Configuring RoboClaw Battery Settings
- Auto Tuning with Motion Studio
- Position Settings in Motion Studio
- Using Linear Actuators with RoboClaw