Hitec HS-815BB Mega Sail Control Servo
Product Code:
HS-815BB
£47.04
£39.20
The HS-815BB Mega sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm.
With its dual ball bearing supported output shaft the HS-815BB will provide years of reliable service in larger sailboat applications.
4.8Volt to 6.0Volt Operation
- Stall Torque (4.8V): 274.96 oz/in. (19.8kg.cm)
- Stall Torque (6.0V): 343.01 oz/in. (24.7kg.cm)
The HS-815BB Mega sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-815BB will provide years of reliable service in larger sailboat applications.
- Control System: +Pulse Width Control 1500usec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -20 to +60 Degree C
- Operating Speed (4.8V): 0.48sec/140° at no load
- Operating Speed (6.0V): 0.38sec/140° at no load
- Stall Torque (4.8V): 274.96 oz/in. (19.8kg.cm)
- Stall Torque (6.0V): 343.01 oz/in. (24.7kg.cm)
- Operating Angle: 70 Deg. one side pulse traveling 400usec
- 360 Modifiable: Yes
- Direction: Clockwise/Pulse Traveling 1500 to 1900usec
- Current Drain (4.8V): 8mA/idle and 700mA no load operating
- Current Drain (6.0V): 8.7mA/idle and 830mA no load operating
- Dead Band Width: 8usec
- Motor Type: 3 Pole Ferrite
- Potentiometer Drive: Indirect Drive
- Bearing Type: Dual Ball Bearing
- Gear Type: All Heavy Duty Nylon Gears
- Connector Wire Length: 11.81" (300mm)
- Dimensions: 2.59" x 1.18"x 1.26" (66 x 30 x 57.6mm)
- Weight: 5.6 oz. (152g)
- Control System: +Pulse Width Control 1500usec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -20 to +60 Degree C
- Operating Speed (4.8V): 0.48sec/140° at no load
- Operating Speed (6.0V): 0.38sec/140° at no load
- Stall Torque (4.8V): 274.96 oz/in. (19.8kg.cm)
- Stall Torque (6.0V): 343.01 oz/in. (24.7kg.cm)
- Operating Angle: 70 Deg. one side pulse traveling 400usec
- 360 Modifiable: Yes
- Direction: Clockwise/Pulse Traveling 1500 to 1900usec
- Current Drain (4.8V): 8mA/idle and 700mA no load operating
- Current Drain (6.0V): 8.7mA/idle and 830mA no load operating
- Dead Band Width: 8usec
- Motor Type: 3 Pole Ferrite
- Potentiometer Drive: Indirect Drive
- Bearing Type: Dual Ball Bearing
- Gear Type: All Heavy Duty Nylon Gears
- Connector Wire Length: 11.81" (300mm)
- Dimensions: 2.59" x 1.18"x 1.26" (66 x 30 x 57.6mm)
- Weight: 5.6 oz. (152g)
