HSR-1425CR

Hitec Continuous Rotation Robot Servo

£22.80 £19.00

The HSR-1425CR is an all new Continuous Rotation dual ball bearing servo and replaces the HSR-1422CR servo.

The Hitec Robotics Continuous Rotation Servo is a standard servo modified for continuous rotation.

4.8Volt to 6.0Volt Operation

  • Speed (sec/60deg): 0.14
  • Max Torque (Kg-cm/oz-in): 3.1/42
Or

Nylon gears and dual ball bearings on the output shaft make the servo fairly robust, intended to be used for long periods of time.

The HSR-1425CR is an all new Continuous Rotation dual ball bearing servo.

If you are looking for a servo to pan or tilt your small camera or sensor multiple turns, this is the servo you need.

  • Speed (sec/60deg): 0.14
  • Max Torque (Kg-cm/oz-in): 3.1 / 42
  • Size: 40.6 x 19.8 x 36.6mm
  • Weight (g/oz): 41.7/0.33
  • Motor Type: Cored Metal Brush
  • Bearing Type: Dual Ball Bearing
  • Gear Type: Nylon Gears 
  • Speed (4.8V/6.0V): 43.4 rpm / 52 rpm
  • Torque oz./in. (4.8V/6.0V): 38.88 / 46.80
  • Torque kg./cm. (4.8V/6.0V): 2.8 / 3.37
  • Size in Millimeters: 40.6 x 19.8 x 36.6
  • Weight grams: 41.7
  • Connector Wire Length: 178mm