Brushed DC Motor: 6V 130-Size,11.5kRPM, 800mA Stall

£2.10 £1.75

This 130-size DC motor has a recommended operation voltage of 3 – 12 V and is used in the larger Pololu plastic gearmotors.

Approximate specifications at 6 V: free-run speed of 11,500 RPM, free-run current of 70 mA, and stall current of 800 mA.

  • 2mm diameter round shaft



It has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA.

For an estimate of the torque, note that the Pololu 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the Pololu 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V.

  • The output shaft has a diameter of 2 mm.
  • Size: 25 x 15 x 20mm
  • Weight: 18g