RSA48-2HS
48P, 24T C1 Spline Servo Mount Gears (Acetyl), RSA48-2HS
As low as £4.62 £3.85
Finally a way to drive gears using servos!
.jpg)
ServoCity's patented 48 pitch gears are designed to attach directly to the output spline of a servo.
These gears work great in combination with our hub mounted gears to drive axles or build pan and tilt mechanisms. Manufactured from Acetyl. Patented
| SKU | # of Teeth | Pitch Diameter | Outside Diameter |
| RSA48-2HS-18 | 18 | 0.3750” | 0.417" |
| RSA48-2HS-19 | 19 | 0.3958” | 0.438” |
| RSA48-2HS-20 | 20 | 0.4167” | 0.458” |
| RSA48-2HS-21 | 21 | 0.4375” | 0.479” |
| RSA48-2HS-22 | 22 | 0.4583” | 0.500” |
| RSA48-2HS-23 | 23 | 0.4792” | 0.521” |
| RSA48-2HS-24 | 24 | 0.5000” | 0.542” |
| RSA48-2HS-25 | 25 | 0.5208” | 0.563” |
| RSA48-2HS-26 | 26 | 0.5416” | 0.583” |
| RSA48-2HS-27 | 27 | 0.5625” | 0.604” |
| RSA48-2HS-28 | 28 | 0.5833” | 0.625” |
| RSA48-2HS-29 | 29 | 0.6042” | 0.646” |
| RSA48-2HS-30 | 30 | 0.6250” | 0.667” |
| RSA48-2HS-32 | 32 | 0.6667” | 0.708” |
| RSA48-2HS-34 | 34 | 0.7083” | 0.750” |
| RSA48-2HS-36 | 36 | 0.7500” | 0.792” |
| RSA48-2HS-38 | 38 | 0.7917” | 0.833” |
| RSA48-2HS-40 | 40 | 0.8333” | 0.875” |
| RSA48-2HS-44 | 44 | 0.9167” | 0.959” |
| RSA48-2HS-48 | 48 | 1.000” | 1.042” |
| RSA48-2HS-54 | 54 | 1.125” | 1.167” |
| RSA48-2HS-60 | 60 | 1.250” | 1.292” |
| RSA48-2HS-66 | 66 | 1.375” | 1.417” |
| RSA48-2HS-72 | 72 | 1.500” | 1.542” |
| RSA48-2HS-84 | 84 | 1.750” | 1.792” |
| RSA48-2HS-96 | 96 | 2.000” | 2.042” |
| RSA48-2HS-100 | 100 | 2.083” | 2.125” |
