3584_0 CE-IZ04-35A2-1.0/0-50A DC Current Transducer
The CE-IZ04-35 series of DC transducers are a set of hall-effect based sensors that can measure the amount of current flowing through a wire simply by threading the wire through the sensor's window.
- Measures DC Current up to 50A
- Accurate within 1% of Full Scale
- Requires ±12V Power Supply
- Connects to the 1145 - 5 to ±12V Sensor Adapter
LAST ONE LEFT !
The CE-IZ04-35 series of DC transducers are a set of hall-effect based sensors that can measure the amount of current flowing through a wire simply by threading the wire through the sensor's window. You can thread the same wire through multiple times and divide the result by the number of times it's been threaded through in order to achieve higher resolution. This sensor can measure DC Current values from 0 to 50 Amps.
This sensor requires a ±12V power supply.
You can use the 1145 – 5V to ±12V Sensor Adapter as a simple option to connect to a Phidget InterfaceKit.
This sensor connects to the 1145 - 5 to ±12V Sensor Adapter The cable used to connect these devices comes with the 1145.
Sensor Properties
Sensor Type | Current |
Sensor Output Type | Non-Ratiometric |
Input Current Min | 0 A |
Input Current Max | 50 A |
Current Measurement Resolution | 50 mA |
Measurement Error Max | 1 % |
Sensor Response Time Max | 7 μs |
Electrical Properties
Supply Voltage | ± 12 V DC |
Current Consumption Max | 25 mA |
Output Voltage Min | 0 V DC |
Output Voltage Max | 5 V DC |
Physical Properties
Wire Window Size | 23 mm |
Operating Temperature Min | -10 °C |
Operating Temperature Max | 80 °C |