1014_2B Phidget Interface Kit 0/0/4

Product Code:
£67.32 £56.10

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

1014_2B Phidget Interface Kit 0/0/4
1014_2B Phidget Interface Kit 0/0/4

The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switching power on and off.

The 1014 has 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT).

Note: This board is not suitable for switching signals. It takes at least 100mA of current to bridge the oxide layer that forms on the relay contacts, and most signals will not meet this requirement. If you need to switch signals, check out the 1017 - PhidgetInterfaceKit 0/0/8.

Comes Packaged with



  • Hardware mounting kit:
  • 4x M3 Bolts (2cm Length)
  • 4x Plastic spacers (5mm Length)
  • 4x M3 Nuts

Physical Properties

API Object Name


Switch Type


Switching Speed Max

20 cpm

Recommended Wire Size

12 - 24 AWG

Operating Temperature Min

0 °C

Operating Temperature Max

70 °C

Board Properties

Controlled By


API Object Name


Electrical Properties

Dielectric Strength

1.5 kV AC

Contact Resistance Max

120 mΩ

Load Voltage Max (DC)

* 30 V DC

Load Voltage Max (AC)

277 V AC

Load Current Min

100 mA

Load Current Max (DC)

7 A

Load Current Max (AC)

12 A

Turn-on Time Max

10 ms

Turn-off Time Max

10 ms

Current Consumption Min

14 mA

Current Consumption Max

300 mA

USB Speed

Low Speed


Product Enquiry