AGV Kit for 600Kg Mobile Robot 24Volt
Only 1 left
A comprehensive AGV kit which includes essential components for your 600kg Mobile Robot design.
Parts included in the kit:
- 2 x 089LDA30X Motors
- 2 x VRLZ090 Gearbox
- 2 x AGV Wheels
- 1 x FBL2360T
- 1 x RoboPads Charging Station
- 1 x Battery Management System
- 1 x Dynamic Shunt Regulator
- Fuse holder, fuses, switch
- Programming cable
Note: this kit does not include a battery or sensors but navigation sensors and magnetic tape are available separately.
|Motor Frame Size||89|
|Motor Dimensions (W x H x L mm)||91x91x160.8|
|Max robot weight (kg)||600|
|Max Motor Speed (RPM)||3000|
|Wheel diameter (mm)||156,4|
|Max Robot Speed (m/s)||6|
|Nominal Amps (Arms)||15|
|Max Amps (Arms)||60|
|Torque at Motor (Nm)||3,2|
|Torque at Wheel (Nm)||29|
|Motor Shaft Encoder (PPR)||4096|
|Number of Pole Pairs||10|
|Assembly Weight (kg)||8.7|
Have a look at here for more products...
|Magnetic Tape 25mm wide for MGS1600||
1" wide magnetic tape to guide your AGV design.
1" width x 0.045" thickness x 150' length (2.54cm x 0.1143cm x 45.72m) magnetic tape for MGS series of Magnetic Guide sensors see related products tab below.View Detail...
|Magnetic Tape 50mm wide for MGS1600||
2" wide magnetic tape to guide your AGV design.
2" width x 0.045" thickness x 150' length (5.08cm x 0.1143cm x 45.72m) magnetic tape for MGS series of Magnetic Guide sensors see related products tab below.View Detail...
|All-metal, shock-resistant 160 mm wide magnetic track sensor||
All-metal, shock-resistant 160 mm wide magnetic track sensor with 3-axis Gyroscope, serial, USB, analog, PWM and CAN output.View Detail...
|CABLE-SENX1 Cable for MGSW, and FLW sensors. 8 pin female M12-8 connector to 8 colour-coded wires, 6 ft long||
Cable for MGSW, and FLW sensors. 8 pin female M12-8 connector to 8 colour-coded wires