STC1005_0
4A Stepper Phidget, STC1005_0
£49.57 £41.31
This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.
The STC1005 allows you to control a bipolar stepper motor (up to 4A). This Phidget connects to your computer through a VINT Hub.
Features
- Control motor position, velocity, and acceleration of one stepper up to 4A
- Set the current limit and holding current separately to optimize power saving
- "Step mode" specifies a target position in 1/16th steps
- "Run mode" rotates continuously at a specified velocity
- Isolated VINT Port improves reliability and eliminates ground loops
- Polarity, Overcurrent, and Power Supply Protection
- Failsafe Protection can be enabled to turn off the device if your program becomes unresponsive
- Monitor Supply Voltage to diagnose power issues and manage battery-powered applications
- Built-in heatsink to protect against overheating
Related Products
Check items to add to the cart or
| Board Properties | |
| Controlled By | VINT |
| VINT Communication Speed Max | 100 kbit/s |
| Controller Properties | |
| Motor Type | Bipolar Stepper |
| Number of Motor Ports | 1 |
| Motor Position Resolution | ¹⁄16 Step (40-Bit Signed) |
| Position Max | ± 1E+15 ¹⁄16 steps |
| Stepper Velocity Resolution | 1 ¹⁄16 steps/sec |
| Stepper Velocity Max | 115000 ¹⁄16 steps/sec |
| Stepper Acceleration Resolution | 1 ¹⁄16 steps/sec² |
| Stepper Acceleration Min | 2 ¹⁄16 steps/sec² |
| Stepper Acceleration Max | 1E+07 ¹⁄16 steps/sec² |
| Sampling Interval Min | 100 ms/sample |
| Sampling Interval Max | 60 s/sample |
| Electrical Properties | |
| Available Current per Coil Max | 4 A |
| Supply Voltage Min | 10 V DC |
| Supply Voltage Max | 30 V DC |
| Current Consumption Min (VINT Port) | 200 µA |
| Current Consumption Max (VINT Port) | 2.5 mA |
| Replacement Fuse | 5A Slow Blow Blade Type, Regular or Micro |
| Isolation Voltage (DC) | 3.8 kV DC |
| Physical Properties | |
| Recommended Wire Size | 16 - 26 AWG |
| Operating Temperature Min | -20°C |
| Operating Temperature Max | 85°C |
Cable Length Calculator
The STC1005_0 is a first generation device and is limited to a 5 meter Phidget cable in all systems.
* The maximum USB cable length is 5 meters.
