3108_1 TPK-03 Immersion Probe K-type
The 3108 - K-Type thermocouple can take continuous temperature readings between -50°C to +700°C with a ±0.75°C accuracy. The 3108 can also take a instant, single temperature reading between -100°C to +900°C.
The 3108 - K-Type thermocouple can take continuous temperature readings between -50°C to +800°C with a ±0.75°C accuracy. The 3108 can also take a instant, single temperature reading between -100°C to +900°C.
It is mostly used to take the temperature of liquids and gels.
- Can take continuous temperature readings between -50°C to +800°C
- Can take a single temperature reading between -100°C to +900°C
- Wire length: 70cm extendable to 170cm
- Removable Miniature Male Connector
The Thermocouple comes with a standard miniature male connector that can be removed to uncover the stripped wires when connecting it to one of the following Phidget temperature sensor:
- 1051 - PhidgetTemperatureSensor 1-Input.
- 1048 - PhidgetTemperatureSensor 4-Input.
On the 1051, connect the white thermocouple wire to (-) terminal block and the red wire to the + terminal block.
On the 1048, connect the white wire to G and the red wire to an input terminal block (numbered 0 to 3).
You could also connect the 3108 to a Phidget Temperature Sensor using a 3106 – Thermocouple Adapter.
| Temperature Range Single Reading | -100°C to +900°C |
| Temperature Range Continuous Reading | -50°C to +800°C -58°F to +1472°F |
| Accuracy | ±0.75°C |
| Wire Size | 28 AWG (0.3mm) |
Pipe
| Material | K/316 stainless steel |
| Width | 3.2mm |
| Length | 200mm |
Handle
| Material | Engineering Plastic |
| Width | 16mm |
| Length | 120mm |
Wire
| Insulation Material | PE Plastic |
| Width | 4mm |
| Length | 70cm extendable to 170cm |
| Connection | Miniature Male Connector |
