3054_0 SSR Relay Board 0.5A, 3054
Rated for 28VAC/0.5amp or 40VDC/0.5amp switching, this SSR is controlled by a digital output.
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion.
By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board diode across the relay output protects the board from static electricity and surges from inductive loads.
Connection
This SSR board can be controlled with Phidget digital outputs.
|
Board |
|
|
Controlled By |
Digital Output (5V) |
|
Electrical Properties |
|
|
Relay Output Type |
MOSFET |
|
Isolation Method |
Photoelectric |
|
Dielectric Strength |
1.5 kV AC |
|
Control Voltage Min |
3 V DC |
|
Control Voltage Max |
30 V DC |
|
Control Current |
10 mA |
|
Load Voltage Max (DC) |
40 V DC |
|
Load Voltage Max (AC) |
28 V AC |
|
Load Current Max (AC) |
500 mA |
|
Load Current Max (DC) |
500 mA |
|
Turn-on Time Max |
5 ms |
|
Turn-off Time Max |
0.2 ms |
|
Contact Resistance Max |
850 mΩ |
|
Physical Properties |
|
|
Recommended Wire Size (Load) |
16 - 26 AWG |
|
Recommended Wire Size (Control) |
16 - 26 AWG |
|
Operating Temperature Min |
-40 °C |
|
Operating Temperature Max |
85 °C |
