3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136)

Product Code:
525136
£7.06 £5.88

This servo to shaft coupler is intended to fasten a 1/4" shaft to the output spline of a servo that has a 25 Tooth (3F/H25T) Spline.

  • 3F Standard Spline (25 tooth)
    Most standard size Futaba servos have the 3F spline.
  • H25T Hitec Standard Spline (25 teeth)
    HS-83XXTH and HSB-93XXTH series servos.
3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136) 3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136) 3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136) 3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136)
3F/H25T Spline Servo to 1/4" Shaft Coupler (Set Screw) (525136)

Futaba 25T Set Screw shaft Coupler is manufactured from hardened brass, and requires a 3/32" Hex Key (sold separately).

This servo to shaft coupler is intended to fasten a 1/4" shaft to the output spline of a servo that has a 25 Tooth (3F/H25T) Spline.

The coupler fastens to the servo by installing the stock servo screw down through the center of the part prior to inserting a 1/4" shaft into the bore.

For a solid connection between the coupler and a shaft, we recommend that you use a 1/4" D-shaft so that the set-screw is able to tighten down on the flat and reduce any chance slippage.

Product Enquiry