MD49

24V 5A Dual H-Bridge Motor Driver, MD49

£52.20 £43.50

Designed to work with our EMG49 gear motors, the MD49 will drive two motors.

Voltage - 24v only.
Current - Up to 5A for each motor.
Encoder - Processes quadrature encoder inputs of 588 counts per wheel turn from the EMG49 motor.
Size - 109mm x 66mm
Features Under & Over voltage protection, motor short circuit protection.

Skip to the beginning of the images gallery

Voltage - 24v only.
Current - Up to 5A for each motor.
Encoder - Processes quadrature encoder inputs of 980 counts per wheel turn from the EMG49 motor.
Size - 109mm x 66mm
Features Under & Over voltage protection, motor short circuit protection.

Full MD49 Documentation

Examples
Arduino - control using the serial interface and display using the LCD05
PIC18F4410 - driving the motor and displaying variables on the LCD05
Picaxe18x - Serial communication example
Raspberry Pi- Use the serial port to drive the MD49 motors and display the encoder values

24V 5A Dual H-Bridge Motor Driver, MD49

Or