1061_1B 8-Motor Phidget Servo
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. Connects to your computer via USB.
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC external power supply; its switching power supply allows the 1061 to efficiently operate from 6 to 15 VDC and can be used with a wide range of batteries.
The 1061 measures the power consumption of each servo and its switching regulator protects the motors from overvoltage. It powers servo motors of up to 3.4 Amps.
The 1061 continuously measures the current consumed by each motor with an accuracy of ±10%.
The AdvancedServo connects directly to a computer’s USB port.
Comes Packaged with
Hardware mounting kit:
- 4x M3 Bolts (2cm Length)
- 4x Plastic spacers (5mm Length)
- 4x M3 Nuts
Servo Controller
|
Number of Motor Ports |
8 |
|
Pulse Width Min |
83.3 ns |
|
Pulse Width Max |
2.7 ms |
|
Pulse Width Resolution |
83.3 ns |
|
Pulse Code Period Max |
25 ms |
Electrical Properties
|
Supply Voltage Min |
6 V DC |
|
Supply Voltage Max |
15 V DC |
|
Current Consumption Max |
26 mA |
|
Continuous Motor Current Max |
(per motor) 1.6 A |
|
Overcurrent Trigger |
(combined) 12 A |
|
Surge Current Max |
(per motor) 3 A |
|
Output Impedance (Motor) |
600 Ω |
|
Output Motor Voltage |
5 V DC |
|
USB Speed |
Full Speed |
Physical Properties
|
Power Jack Hole Diameter |
5.5 mm |
|
Power Jack Pin Diameter |
2.1 mm |
|
Power Jack Polarity |
Center Positive |
|
Recommended Wire Size |
12 - 24 AWG |
|
Object Temperature Min |
0 °C |
|
Object Temperature Max |
70 °C |
