1018_2B Phidget USB Interface 8/8/8
- Buy 5 for £84.37 £70.31 each and save 10%
- Buy 10 for £79.32 £66.10 each and save 15%
- Buy 25 for £74.41 £62.01 each and save 20%
- Buy 50 for £72.16 £60.13 each and save 23%
- Buy 100 for £65.32 £54.43 each and save 30%
The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs.
Analog Inputs
The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position, or pressure. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor.
Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms up to 1000ms.
For more information about these inputs and their connectors, have a look at the Analog Input Primer.
Digital Inputs
The Digital Inputs have a Digital Input Hardware Filter to eliminate false triggering from electrical noise. They can be used to convey the state of devices such as push buttons, limit switches, relays, and logic levels.
Digital Outputs
The Digital Outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact, anything that will accept a CMOS signal.
Board |
|
Controlled By |
Digital Output (5V) |
Electrical Properties |
|
Relay Output Type |
MOSFET |
Isolation Method |
Photoelectric |
Dielectric Strength |
1.5 kV AC |
Control Voltage Min |
3 V DC |
Control Voltage Max |
30 V DC |
Control Current |
10 mA |
Load Voltage Max (DC) |
40 V DC |
Load Voltage Max (AC) |
28 V AC |
Load Current Max (AC) |
2.5 A |
Load Current Max (DC) |
2.5 A |
Turn-on Time Max |
5 ms |
Turn-off Time Max |
0.2 ms |
Contact Resistance Max |
50 mΩ |
Physical Properties |
|
Recommended Wire Size (Load) |
16 - 26 AWG |
Recommended Wire Size (Control) |
16 - 26 AWG |
Operating Temperature Min |
-40 °C |
Operating Temperature Max |
85 °C |