1-Port VINT Hub Phidget
This VINT Hub has a single high-speed VINT port and is great for systems with limited space.
The 1-Port VINT Hub is the simplest way to connect a VINT device to your computer. Phidgets are "Plug and Program" - When plugged in, they are automatically discovered by the Phidget drivers and made available to your program. You can configure the VINT port to operate in different modes that make it easy to interface with VINT devices, analog sensors, or logic-level circuits.
Features
- One compact versatile port that can operate in different modes
- Communicate with an intelligent VINT Device
- Read a 0-5V Voltage or ratiometric sensor
- Act as a PWM-enabled digital output or digital input
- The mode of each port is set in your program, allowing for flexible use in projects
The HUB0007_0 has improved immunity, resulting in a longer maximum cable length for any device with the Shield icon printed on the enclosure.
It also supports high-speed megabit communication (marked with Speed). For some VINT devices, this will result in faster data rates and lower latency.
Product Specifications
| Board Properties | |
| Controlled By | USB (USB-A) |
| Number of VINT Ports | 1 |
| VINT Communication Speed Max | 1 Mbit/s |
| Electrical Properties | |
| USB Voltage Min | 4.5 V DC |
| USB Voltage Max | 5.3 V DC |
| USB Speed | Full Speed |
| Current Consumption Min | 18 mA |
| Available External Current | 1.1 A |
| VINT Port Voltage | * 5 V DC |
| Voltage Inputs | |
| Voltage Input Resolution (bits) | ** 16 bit |
| Number of Voltage Inputs | 1 (Shared) |
| Voltage Input Resolution (V) | 50 µV DC |
| Sensor Input Impedance | 324 kΩ |
| Input Voltage Min (DC) | 0 V DC |
| Input Voltage Max (DC) | 5.3 V DC |
| Voltage Input Noise (@ 1ms Interval) | 1.8 mV DC |
| Voltage Input Noise (@ 100ms Interval) | 300 µV DC |
| Sampling Interval Max | 60 s/sample |
| Sampling Interval Min | 1 ms/sample |
| Digital Inputs | |
| Number of Digital Inputs | 1 (Shared) |
| Pull-up Resistance | 40 kΩ |
| Low Voltage Max (True) | 1.3 V DC |
| High Voltage Min (False) | 1.7 V DC |
| Low Voltage Trigger Length Min | 2.8 ms |
| High Voltage Trigger Length Min | 2.8 ms |
| Digital Input Voltage Max | 5.5 V DC |
| Digital Input Type | Switch (Active Low) |
| Digital Outputs | |
| Number of Digital Outputs | 1 (Shared) |
| Series Resistance | 498 Ω |
| Digital Output Available Current | 2.6 mA |
| Digital Output Voltage Min | 0 V DC |
| Digital Output Voltage Max | 3.3 V DC |
| PWM Frequency | varies, max 25 kHz |
| Duty Cycle Resolution | 0.8% |
| Physical Properties | |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 85 °C |
* VINT Port voltage is taken directly from USB voltage, so it may not be exactly 5V depending on what kind of USB port the Hub0007 is plugged into.
** ADC resolution is 12 bit, oversampled to 16 bit.
