0800 756 9913Sales Order Line Mon-Fri 9am-5pm

1012_2 Phidgets USB Interface 0/16/16

Product Code: 1012

Availability: In stock

Excl. VAT: £80.40 Incl. VAT: £96.48
  • Buy 5 at £74.77 (£89.72 incl. VAT) each and save 8%
  • Buy 10 at £68.34 (£82.01 incl. VAT) each and save 15%
  • Buy 40 at £62.18 (£74.62 incl. VAT) each and save 23%
  • Buy 80 at £56.28 (£67.54 incl. VAT) each and save 30%
You will earn 80 Robo Points for buying this product
OR

Product Features

  • 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
  • 16 Digital Outputs controlling up to 30VDC
  • Red LED indicators on digital outputs and Green LED indicators on digital inputs
  • Two terminal blocks with +5V USB power
  • Connects directly to a computer’s USB port

PhidgetInterfaceKit 0/16/16  1012_2  One of the most requested version of the interface kits.

  • 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
  • 16 Digital Outputs controlling up to 30VDC
  • LED indicators on all I/O channels

Inputs are activated by 4 to 30 Volt signal. Outputs sink upto 30V at 2A. The outputs do not provide power they just act as switch to ground.

Comes with a 180cm USB Cable & mounting hardware kit.

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

  • A 3018 - Mini-USB cable 1830cm
  • A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)

 

 

 

 

Digital Input Impedance (-0.5V to +5.5V) 110KkΩ
Digital Input Impedance (>5.5V) 10kΩ
Digital Output Impedance (on) 0.2kΩ

 

Digital Input Update Rate 125 updates/second
Digital Input Minimum Event Detection Time 3ms

 

Digital Output Update Rate 125 updates/second
Digital Output Current Sinking (30V) 2A max

 

USB Voltage Range 4.6 – 5.5VDC
Device Quiescent Current Consumption 14mA
Maximum Current with all digital outputs LEDs ON 62mA
Maximum Current with all digital outputs and inputs LEDs ON 106mA
Available Current for Applications 394mA max

 

Terminal Block wire size 16 – 26AWG
Operating Temperature 0 - 70°C
View File1012 Product Manual    Size: (538.98 KB)
View File1012 Mechanical Drawings    Size: (478.02 KB)
View File1012 Download 3D Step File    Size: (600.19 KB)
View FilePhidgets Programming Manual v2.1.7    Size: (2.19 MB)
View FileDescription of the Phidget Libraries    Size: (163.21 KB)
View FileWorking with WindowsCE    Size: (71.23 KB)
View FileWorking with Phidget Webservice    Size: (123.34 KB)

Additional Information

Video No
1012_2 Phidgets USB Interface 0/16/16 <p>PhidgetInterfaceKit 0/16/16&nbsp; 1012_2&nbsp; One of the most requested version of the interface kits.</p> <ul> <li>16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC</li> <li>16 Digital Outputs controlling up to 30VDC</li> <li>LED indicators on all I/O channels</li> </ul> <p>Inputs are activated by 4 to 30 Volt signal. Outputs sink upto 30V at 2A. The outputs do not provide power they just act as switch to ground.</p> <p>Comes with a 180cm USB Cable &amp; mounting hardware kit.</p> <p>The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.</p> <p>The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.</p> <ul> <li>A 3018 - Mini-USB cable 1830cm</li> <li>A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)</li> </ul> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p>Move your mouse over image or click to enlarge
Related Products

Check items to add to the cart or select all

BASKET

You have no items in your shopping cart.

My Points

Please log-in or create an account, to use your points.
Log-in or create a new account
Sign Up for Our Newsletter:

Active Robots

Popular Products

Customer Service

More Info

 
© 2012 Active Robots.

ACTIVE ROBOTS LTD, 10A NEW ROCK INDUSTRIAL ESTATE, NEW ROCK, CHILCOMPTON, RADSTOCK, SOMERSET, BA3 4JE