3302_0 Bipolar 48mm Stepper

This motor is a larger NEMA-17 motor that produces a whopping 4800g-cm of holding torque and fine resolution. The motor is also very efficient in converting current into torque and velocity.

• Very High Torque, Fine Resolution
• NEMA-17 Bipolar 4-wire
• Step angle: 0.9°
• Holding Torque: 4800g-cm @ 2.4 Amps

• Step Angle 0.9°
• Step Accuracy 5%
• Holding Torque 4800g-cm / 66.66 oz-in
• Coil Resistance 1 Ohm
• Rated Current 2.4A Motor
• Length 48mm
• Mounting Plate
• Size Nema-17
• Shaft Diameter 5mm
• Weight 362g
• Number of Leads 4

The 3302 stepper motor connects to the 1063 - PhidgetStepper Bipolar 1-Motor.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

Note: Make sure to unplug the power cord from the 1063 before switching wires around.