An extremely affordable, easy to use RF serial data module with great range pre-built into a USB stick.
Provides an out-of-the-box wireless RF serial connection without the need for programming or end-user configuration.
Comes pre-loaded with Ciseco firmware which enables the SRF-Stick to interwork with all other Ciseco RF modules, without any programming or configuration. You provide data one end and it appears on the other. All data packetisation, data checking, etc. is all done for you.
Makes use of Texas Instruments’ CC1111, a low-power System-on-Chip, which sports a micro-controller unit (MCU), memory, a sub-1GHz transceiver, an encryption engine and a USB controller.
- Comes pre-built as a USB stick
Supports network identifier PANID for communications into separate networks if desired
Full speed USB controller (12Mbps)
868 and 915 MHz ISM/SRD bands
250kbps transfer rate
10dBm (10 mW) power
Low current consumption (RX: 24mA; TX: 36mA @ -10dBm output power)
Facilitates remote Arduino/Xino over-the-air programming
Made in the UK
Low power wireless applications operating in the 868 and 915 MHz ISM/SRD bands
Industrial monitoring and control
Wireless sensor networks
Wireless alarm and security systems
Automatic meter reading
Home and building automation
Low power telemetry
Limitations to use:
The SRF-Stick is not recommended or authorised for use in life support, surgical implantation, nuclear or aircraft applications or for any use or application in which the failure of a single component could cause substantial harm to persons or property.