GWS Piezo Gyro PK 3
How the gyro works. Firstly, a PWM servo signal is continually sent to the gyro. This same signal is output for use by a servo (or microcontroller) but the value is adjusted when the gyro is rotated about its axis of measurement.
|
GWS Piezo Gyro
A Piezo Gyro senses rotation about a single axis and outputs a servo signal intended to be used to counter that rotation. Piezo gyros are typically used in R/C aircraft to stabilize flight by automaticaly countering unwanted motion, e.g. from wind. They can also be used in robotics for balancing, or to detect rotation, or to drive a "tracking" servo which continues to point to a fixed object even if your robot turns.
Extremely small and light, this gyro can be used on almost any sized robot. Comes with universal 3-pin connectors, for compatibility with all brands of servos and radio gear.
|
Datasheet
Download Assistance: To download a document, either left click on the text link adjacent to the document, or right click on the link and choose "Save Target As" then choose a destination on your computer for the document. A free Adobe Acrobat Reader can be downloaded
from Adobe (size 8.5Mb - about 30 minute download on a 56k modem)
|
Copyright © Active Robots Ltd. 2003 - 2008
|
|
|
ISO 9001 : 2000
