PIC GSM Cellular
Development Board

PIC-GSM is a great development board for cellular and remote monitoring applications. With it, you can easily monitor and control your home from anywhere there is cell phone coverage with your GSM cellular account. Insert any GSM SIM card and start accessing this board remotely over the cellular network.

Switch on and off relays remotely by SMS, monitor and toggle the status of any GPIO pin, speak or listen on the audio channel of the board, even monitor the built-in temperature sensor.

more information & downloads

AVR GSM Cellular
Development Board

AVR-GSM is excellent board for adding remote monitoring and control in remote places by GSM cellular network.

Do you want to switch on/off your local heating in your mountain house? To monitor the temperature at up to 8 remote points up to 30 meters away from the module?

To listen to what happens in your house with silent call after you get message for alarm status? Then AVR-GSM is the board for you!

more information & downloads

GM862 Evaluation Kit - RS232

Complete package for the GM862-GPS with RS232 Eval board. This kit is for the GM862-GPS and all the needed antennas and cables to begin playing with GPS and cellular!

Includes:

• GM862 Celluar/GPS Module
  
• GM862 RS232 EVK Breakout
• Board
  
• 2pcs MMCX to SMA Cable
  
• Quad-band GPRS Antenna
  
• Antenna GPS Magentic Mount
  
• 6' Male/Female DB9 Serial Cable

GM862 RS232 Eval v1.1 Schematic

GM862 USB Eval Datasheet

GM862 Evaluation Kit - USB

Complete package for the GM862 with USB Eval board. This kit is for the GM862-GPS module with all the connectors and antennas to get you working with cellular and GPS! Please feel free to make your own kit using the SKU numbers below if you need different parts.

Includes:

• GM862 Cellular/GPS Module
  
• USB Eval Board
  
• 2 pcs MMCX to SMA Cable
  
• Quad-band GPRS Antenna
  
• Antenna GPS Magnetic Mount
  
• 6' USB Cable

GM862 USB Eval Datasheet

GE864 Evaluation Board

This is a simple to use USB evaluation board for the GE864 cellular module. All pins of the GE864 are broken out, which provides access to the state-of-the-art DAC, ADCs, GPIOs, SPI and I2C interfaces. No messy 3.8V regulation. No tricky 3.3V to USB converter. It's all done for you!

The serial pins are wired up to an FT232RL UART-to-USB bridge. You can plug the GE864 Eval Board into any USB port and it will work just like a standard COM port. Power up the board, turn on the module, and you can start sending and receiving AT commands via a terminal emulator.

more information & downloads

GE864 Breakout Board

This is a breakout board for the Telit GE864 Quad cell module.The board comes with a module installed, as well as a U.FL antenna connector. Standard 0.1" spaced headers allow easy access to a full range of functionality. Just connect your power supply (3.8V), SIM card, antenna, serial connection and a power button and you're off and running!

The low profile and small size of the unique BGA package for the GE864-QUAD enable the design of very compact applications.

more information & downloads

GE865 Breakout Board

This is a breakout board for the new Telit GE865 Quad cell module. The board comes with the module installed, as well as a U.FL antenna connector. Standard 0.1" spaced headers allow easy access to a full range of functionality. Just connect your power supply (3.22-4.5VDC, 3.8VDC nominal), SIM card, antenna, serial connection and a power button and you're off and running!

The new GE865 product family introduces the smallest GSM/GPRS Ball-Grid-Array (BGA) modules in the market.

more information & downloads

GM862 Evaluation Kit -
Basic 50-Pin

Complete package for the GM862 with 50-Pin Breakout Board and all the antennas and connectors you need for cellular and GPS! This kit is for the GM862-GPS.

Includes:

• GM862 Cellular/GPS Module
  
• GM862 50-Pin Breakout Board
  
• 2 pcs MMCX to SMA Cable
  
• Quad-band GPRS Antenna
  
• Antenna GPS Magnetic Mount

GM862 Evaluation Board - USB

The next generation evaluation board for the GM862. The GM862 Eval USB has a full 50-pin breakout, USB B connector, and a Python script enable switch. This allows connections to the audio, digital, and camera interfaces on the GM862 module. The GM862 Eval USB attaches to any USB port and appears as a standard com port. Power up the board, turn on the module, and you can start sending and receiving AT commands via HyperTerminal. No messy 3.8V regulation. No tricky 3.3V to RS232 level converter. It's all done for you!

MORE INFORMATION & DOWNLOADS

GM862 Evaluation Board - RS232

The GM862 RS232 EVK is a standard serial based 50-pin breakout board with external power. This allows connections to the audio, digital, and camera interfaces on the GM862 module. The GM862 RS232 EVK attaches to any RS232 system. Power up the board, turn on the module, and you can start sending and receiving AT commands via HyperTerminal. No messy 3.8V regulation. No tricky 3.3V to RS232 level converter. It's all done for you!

Communication via RS232 up to 115kbps. The MAX3232 IC can be disconnected to allow for external control of the TX and RX pins on the GM862 module (3V logic only!).

MORE INFORMATION & DOWNLOADS

GM862 Evaluation Board
Basic 50-Pin

A 50-pin breakout board for the GM862. No components, no headers, just a 50-pin molex connector and two rows of 0.1" footprints with pin labels. Take absolute control over the GM862!

Dimensions: 63.5x63.5mm

GM862 Breakout Schematic

GM862 USB Eval Datasheet

Know somone who might be interested? Share it with them!