Low Cost Wireless RF Serial Link - Active Communications
Rollover to Zoom
|
Radio Communications Board
This radio module removes all of the overhead normally associated with radio communications.
All of the necessary construction of packets, encoding/decoding and timing is carried out at the module.
|
|
To use these modules, simply connect them to a com port and using either your own software or Hyper terminal set to 19,200 baud, 8 data bits, 1 stop bit, no parity and no handshaking, then, whatever you type in one end will appear exactly the same at the other.
Key Features
- 10 user selectable frequencies between 433MHz & 434MHz
- Polarity protected input power 7.0 to 20Vdc
- User selectable power output up to 10mW
- Range Upto 250m line of sight
- Baud rates 2400 to 38400
- Free configuration software
The US version has a fixed frequency of 914.5MHz and an output power of 1mw otherwise the specification is as above
Two RF Serial boards are required to establish a communications link
|
Downloads
Download Assistance: To download a document, either left click on the text link adjacent to the document, or right click on the link and choose "Save Target As" then choose a destination on your computer for the document. A free Adobe Acrobat Reader can be downloaded
from Adobe (size 8.5Mb - about 30 minute download on a 56k modem)
|
Know somone who might be interested? Share it with them!
|
|
|
Copyright © Active Robots Ltd. 2003 - 2010
|
|
|
