GP TC206 3900mAh Powerpack

The new NiMH battery pack that everyone is talking about! With a capacity of 3900mAh, it is capable of delivering extreme power!

GP 4100mAh NiMH Sub C Cell

The revolutionary GP4300 Professional R/C Hobby Battery, with enhanced punch power and ultra–high MPV, is the most reliable power source treasured by champions in prestigious competitions worldwide. It provides vigorous and persistent power for the winners to outperform their competitors.

GP430SCHR Datasheet

GP TC201 1600mAh Powerpack

GP speciality battery pack ideal for remote control car racing.

6.0vdc 1600mAh Powerpack

This 6.0vdc NiMH 1600mAh battery pack is made from five high capacity AA cells and 18 gauge multi–conductor wire for the best power transfer possible. The quick connect plug makes it easy to retrofit these battery packs into your cool robot design. This pack weighs 4.9oz., about half the weight of an equivalent NiCad pack, perfect for your walking or fighting robot.

6.0vdc 2800mAh Powerpack

This 6.0vdc NiMH 2800mAh battery pack is made from five high capacity AA cells and 18 gauge multi–conductor wire for the best power transfer possible. The quick connect plug makes it easy to retrofit these battery packs into your cool robot design. This pack weighs 9.34oz., about half the weight of an equivalent Ni-Cad pack, perfect for your walking or fighting robot.

PERMABATT Drive Battery
NiMH 6/1400-AA-W

This battery pack is for models up to speed-400-class and comparable brushless motors.

Specification

• Nominal voltage : 7,2 V / 6 cells
• Cell type: 1400 mAh/AA/NiMH
• Dimensions: 45x28x50mm(approx)
• Weight approx.: 170 g
• Fast-charge current max. 1,4 A
• Discharge current max. 8,0 A (12 A for 60 sec)
• Format: W

Permabatt Drive Battery
NiMH 7/1400-AA-S

This battery pack is for models up to speed-400-class and comparable brushless motors.

Specification

• Nominal voltage : 8,4 V / 7 cells
• Cell type: 1400 mAh/AA/NiMH
• Dimensions: 102x52x15mm (approx)
• Weight approx.: 200 g
• Fast-charge current max. 1,4 A
• Discharge current max. 8,0 A (12 A for 60 sec)
• Format: S

Heavy Duty Wiring Harness

These heavy duty wiring harnesses are perfect for your small robot. The quick connect end mates to our NiMH battery packs, and the other end is stripped, but not tinned for screw terminal use.

7.2 to 8.4V Mains Slow Charger

The O–TD7/8 is a mains slow charger for 7.2v and 8.4v rechargeable batteries. The charger is fitted with Tamiya compatible output connector. The mains input is 230v 50Hz and the output is 250mA. This charger is produced to meet all European standards.

Pro–Peak AC Delta Base
Fast Charger

A simple to use, mains input charger designed for charging 4 to 8 cell NiCd and NiMH packs. Its Delta Peak cut–off and automatic switch over to a maintenance trickle charge means it’s ideal for fast charging or topping up charging transmitter and receiver packs. With a choice of three switchable output currents of 0.5, 1.0 and 2.5A it is suitable for a wide variety of applications.

Fast or trickle charge 4~8 cell NiCd or NiMH packs.

Wattage Fast Charger

A handy little Delta–Peak charger for NiCad and NiMH batteries. Can handle packs from 2 to 10 cells and has a fixed charge current of 1.8A. Supplied with pre–fitted crocodile clips for your power supply (12V) and a tough, metal outer case. No parameters to select, just plug it in and charging starts automatically.

Tamiya Wired Connectors

Handy Tamiya style connectors available separately in both male and female versions pre–fitted with good quality 16AWG cable. The plain cable end has been soldered tinned for easy application to a battery or speed controller.

Charger Lead

One metre charger lead with gold bannana plugs at one end and male tamiya style connector on the other.