Phidgets - 1014 - PhidgetInterfaceKit 0/0/4
Phidgets are an easy to use set of building blocks for low cost sensing and control from your PC. Using the Universal Serial Bus (USB) as the basis for all Phidgets, the complexity is managed behind an easy to use and robust Application Programming Interface (API). Applications can be developed quickly in Visual Basic, VBA (Microsoft Access and Excel), LabView, Java, Delphi, C and C++.
Click to Enlarge
|
PhidgetInterfaceKit 0/0/4
The PhidgetInterfaceKit 0/0/4 Provides a convenient way to interface your PC with various higher-voltage devices such as incandescent bulbs, high-power relays, and motors
The 1014 contains 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT).
- Maximum DC Switching Voltage: 100VDC
- Maximum DC Switching Current: 5A
- Maximum AC Switching Voltage: 250VAC
- Maximum AC Switching Current: 10A
- Terminal blocks accept 12-24 AWG wires
|
Note: All relay contacts will slowly oxidize over time, depending on their construction. When the relay is switched, a certain amount of electricity is required to break through the oxide layer. The relays on the 0/0/4 have a minimum switching current of 100mA @ 5VDC, and therefore are not suitable for switching signals.
Related Products
If you are looking for a product to do signal switching see the 1017 - PhidgetInterfaceKit 0/0/8.
If you already have a 1018 – PhidgetInterfaceKit 8/8/8 you might want to have a look at the 3051 – Dual Relay Board and save yourself some money. |
Datasheet
Download Assistance: To download a document, either left click on the text link adjacent to the document, or right click on the link and choose "Save Target As" then choose a destination on your computer for the document. A free Adobe Acrobat Reader can be downloaded
from Adobe (size 8.5Mb - about 30 minute download on a 56k modem)
|
Know somone who might be interested? Share it with them!
|
|
|
Copyright © Active Robots Ltd. 2003 - 2010
|
|
|
