Interface Kits (I/O Boards) (5 products) - Analog inputs can be used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. There are many plug and play Phidget sensors that require no assembly. In addition, any sensor that returns a signal between 0 and 5 volts can be easily interfaced.
Digital inputs can be used to convey the state of push buttons, limit switches, relays.Digital outputs can be used to drive LEDs, solid state relays, transistors; in fact, anything that will accept a CMOS signal.
Single Board Computer (4 products) - The PhidgetSBC is a fully functional Single Board Computer with an integrated PhidgetInterfaceKit 8/8/8. At its most basic, it can be thought of as a Phidget that you connect using a network cable instead of directly to the USB. We also stock various accessories for the PhidgetSBC
Sensors (59 products) - Phidgets are an easy to use set of building blocks for low cost sensing and control from your PC. Using the Universal Serial Bus (USB) as the basis for all Phidgets, the complexity is managed behind an easy to use and robust Application Programming Interface (API). Applications can be developed quickly in Visual Basic, VBA (Microsoft Access and Excel), LabView, Java, Delphi, C and C++.
Starter Kits (7 Products) - Phidgets Starter Kit is one of the most popular Phidgets; bundled together. An excellent kit to begin hacking, the kit includes the popular PhidgetInterfaceKit 8/8/8 with an assortment of sensors, PhidgetRFID tag reader and PhidgetServo interface kits. The starter kit is also supplied with interface accessories including switches, led's, interface cables and 2.3 Amp power supply adaptor.
Text LCD/LED (2 Products) - PhidgetTextLCD displays text on vibrant LCD screens. You can choose from White, Blue, Red and Green displays. A USB cable (included) is all that is required to control and power this device.
Motor Control (9 Products) - USB device for controlling two standard DC motors. Input voltage from 5-9 VDC with a maximum current of 1.5Amps per motor. Over current error is given in software API when motor exceeds limit. Packaged with USB cable, and manual.
Linear Actuators (2 Products) - The L12 Linear Actuator is an axial design with a powerful drivetrain and a rectangular cross section for increased rigidity. The L12 actuator is designed to move push or pull loads along its full stroke length.
Bipolar Stepper Motors (13 products) - Bipolar motors have a single winding per phase. The current in a winding needs to be reversed in order to reverse a magnetic pole, so the driving circuit must be more complicated, typically with an H-bridge arrangement. There are two leads per phase, none are common.
Planetary Gearbox DC Motors (4 products) - The 3250 is a 3.8 Watt motor that consumes 0.65 Amps. It generates high torque at low speed.
The 3251 is a 3.8 Watt motor that consumes 0.65 Amps. It generates the highest torque of all our DC motors, and also turns at the lowest speed.
Unipolar Stepper Motors (3 Products) - 3314 is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work. 3315 is a good compromise between the 3314 and the 3316. The 3316 motor is good for turning small knobs, buttons, etc.
Relay Boards (5 Products) -The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC. The relay board is controlled by a digital output on the PhidgetInterfaceKit 8/8/8, the PhidgetTextLCD 8/8/8, or the PhidgetRFID v2.0 and greater.
RFID (2 Products) - PhidgetRFID reads RFID tags, a technology used for security and location tracking. Each RFID tag contains a unique code. The PhidgetRFID reader reads these codes and returns them to your application when tags are brought within 10 cm (4") of the reader. The tag does not have to be visible to be read.
Adapter Boards (6 Products) - PhidgetRFID reads RFID tags, a technology used for security and location tracking. Each RFID tag contains a unique code. The PhidgetRFID reader reads these codes and returns them to your application when tags are brought within 10 cm (4") of the reader. The tag does not have to be visible to be read.
Accessories (15 products) - Two standard accessory sensor cables are available in 60cm or 350cm lengths suitable for use with Phidgets interface kits and sensors. Also useful for connecting custom peripheral devices. RFID Tag Accessories 30mm Disc, Credit Card Type and Key Fob.
Know somone who might be interested? Share it with them!
