Low-cost through-hole carrier boards are still available separately. This board provides a wire-wrap or solder area for permanent BASIC Stamp 1 projects, a 9-volt battery clip, and programming 3 pin header connection.
Features:
14-pin SIP socket for a BS1-IC
3-pin programming connection
9V Battery Clip
Reset Button
Through-hole soldering area
Key Specifications:
Power Requirements: 9 VDC
Communication: Serial
Dimensions: 2.50 x 1.50 x 0.50 in (6.35 x 3.81 x 1.27 cm)
Operating Temperature: -40 to +185 °F (-40 to +85 °C)
For students, hobbyists, and professionals who desire the small form and features of the BASIC Stamp® 1 microcontroller, but need a development platform in the mold of the Parallax Board Of Education and HomeWork boards; the BASIC Stamp 1 Project Board is low-cost solution that is sure to fit the bill.
The BS1 Project Board consists of a surface-mounted BASIC Stamp 1 on a 3 1/4" x 2 1/2" (8.3 x 6.4 cm) printed circuit board. The board includes a 9V battery clip, a mechanically interlocked 2.1 mm power jack, DB-9 connector for programming, and LM2936 regulator providing 40 mA for your projects.
BASIC Stamp® 2 carrier board has 24-pin DIP socket for the BS2-IC, BS2E-IC, BS2SX-IC, BS2P24, BS2PX24, Spin Stamp, and Javelin modules. The board also contains a through-hole prototype area perfect for general or school projects, battery clip for simple power connection, and reset button. 9V battery is required (not included).
Features:
24-pin DIP socket
9V battery clip
Serial port for communication and DEBUG after programming
Dimensions: 2.57 x 3.10 x 0.56 in (65.31 x 78.96 x 14.46 mm)
The Parallax Professional Development Board (PDB) is high-quality, fully-integrated development platform for BASIC Stamp, Javelin Stamp, and SX28AC/DP microcontrollers. A wide variety of typical I/O (LEDs, LCD interface, buttons, etc.) devices and circuitry are built into the PDB, providing the developer with an ideal platform for rapid microcontroller project development.
Board of Education Full Kit (Including BS2 Microcontroller)
The Board of Education Full Kit is a concise package of all the hardware you need to begin building projects with the BASIC Stamp microcontroller. Everything you need is included except for a power supply, components and parts to build projects. So if you plan to purchase the Stamps in Class parts and text selections or if you have a workshop full of LEDs, resistors, capacitors, sensors and more, then this is the right kit for you.
Board of Education (Development Board Serial Version)
The Board of Education (BOE) was originally designed in coordination with our educational customers to teach microcontroller programming and this remains today as the most popular application. The majority of the Stamps in Class student guides (i.e. Robotics with the Boe-Bot) requires a BASIC Stamp® 2 module with a Board of Education carrier board.
Board of Education (Development Board USB Version)
The Board of Education (BOE) was originally designed in coordination with our educational customers to teach microcontroller programming and this remains today as the most popular application. The majority of the Stamps in Class student guides (i.e. Robotics with the Boe-Bot) requires a BASIC Stamp® 2 module with a Board of Education carrier board. Even if you aren’t using our SIC curriculum, the ease of use and expandibility make the BOE an ideal project board for BASIC Stamp 2 microcontroller experimentation. With the included a handy power switch and a servo jumper, it surpasses the features of previous BOE versions.
Parallax's BASIC Stamp 2pe Motherboard provides a compact, professional-grade platform for BASIC Stamp applications. With the MoBoStamp-pe and an assortment of plug-in daughterboards, users can easily develop systems requiring more processing power than a BS2 alone can provide.
The MoBoStamp-pe includes a USB interface for programming and debugging on an attached PC. The motherboard can either be powered by the USB connection or for portable applications; the motherboard can be powered through an attached daughterboard and external power source.
Parallax's PWR-I/O-DB is a daughterboard that plugs into the BASIC Stamp 2pe Motherboard. It provides both power and a handy interface to potentiometers and servos, along with Parallax's various three-pin devices, including:
The Stamp PLC (Program Logic Controller) is sized for automating small machines. Specified by Parallax and designed by Lawicel HB of Sweden, this product represents our combined expertise to answer to a frequent request from our customers. A 24-pin BASIC Stamp module or Javelin Stamp module is required and sold separately.
PLCs are microcontrollers that are packaged to withstand the hazards of an industrial environment. Stamp PLC inputs and outputs are optically isolated, fully protected, and the electronics are electrically tough and rather immune to noise typically present in industrial environments.
The Parallax Internet NetBurner Kit (PINK) is an Embedded Web Server which enables your BASIC Stamp®, SX or Propeller Microcontroller to communicate over a network or even the Internet. The PINK Module allows your microcontroller to send e-mail or UDP messages to alert you to events or provide status messages. Communication with the host controller is done using a simple TTL serial interface.
The BS1USB is a handy little device is perfect for adding a user-definable function to your PC. For example, with a few lines of code and a little hardware, you can create a data logger that runs remotely, then uploads data to your PC each time it is reconnected. Headers provide easy access to all 8 I/O pins, power, and ground.
It's amazing what you can accomplish with this well-proven microcontroller and its simple PBASIC 1 language. All vital components (processor, clock source, memory, power regulator) are provided on the tiny PCB; just connect power and go!
