The all metal construction of this rotating base provides the ultimate in strength and rigidity. It is made from Aluminium and powder coated, laser cut and formed, cold rolled steel components. The top Servo Bracket allows two servos to be combined for double the strength. The base supports the SSC-32 and Bot Board, ServoPod, or OOPic-R controllers. Servos are not included.
High quality black anodized aluminium multipurpose megascale servo bracket. Works great for making multi-axis joints for use in robot arms and legs. Sold in a 2-pack.
High quality black anodized aluminium dual servo bracket. Used where you need to double the servos on a single axis for increased strength. Works great for the shoulder of a robot arm. Sold in a single pack. Fits standard size servos.
Requires an ASB-09 or ASB-10 to connect to the servo horns.
High quality, black anodized aluminium "C" bracket with ball bearings suitable for use with multi-purpose servo brackets or heavy duty servo hinge sold separately.
These brackets are useful for making your own arms and legs with ball bearings. Sold in a 2-pack, fits standard size servos.
High quality, black anodized aluminium "C" bracket with ball bearings suitable for use with multi-purpose servo brackets or heavy duty servo hinge sold separately.
These brackets are useful for making your own arms and legs with ball bearings. Sold in a 2-pack, fits standard size servos.
High quality black anodized long "C" mega-scale servo bracket. Works great for making multi-axis joints for use in robot arms and legs. Sold in a 2-pack. Fits HS-755HB, HS-755MG, and HS-5745MG servos
High quality, black anodized Aluminium "C" bracket with ball bearings works great with our Multi-Purpose Servo Bracket or Heavy Duty Servo Hinge sold separately.
Useful for making your own arms and legs with ball bearings. The offset hinge was made specifically for use in Biped shoulders, but can also be used anywhere an offset is required. Sold in a 2-pack. Fits standard size servos.
These bearings are perfect for adding to our older servo hinges, or your cool design. By enlarging the small hole on the older "C" brackets, the ball bearing assembly can be added with ease. Adding this ball bearing assembly improves the performance of the older servo brackets, making them virtually friction-free
These Aluminium brackets are designed to attach a "C" bracket to the end of a Multi-Purpose servo bracket. There are several other configurations possible. Sold in a 2-pack.
Compatible with the Servo Erector Set components.
High quality black anodized brushed aluminium.
Heavy duty .125" stock.
Works with our GHM-01, 02, 12-15, plus the PGHM-01 thru PGHM-03 motors.
High quality black anodized dual inline multi-purpose servo bracket. Works great for making multi-axis joints for use in robot arms and legs. Sold individually. Fits standard size servos.
High quality black anodized aluminium servo offset axis bracket. Works great for making a wrist rotate for a robotic arm, or as a bicep rotation on a humanoid arm. Sold in a single packs. Fits standard size servos.
High quality black anodized aluminium 15-degree ankle servo bracket. Used in the reverse knee biped legs for the ankle joint. Designed for use with ARF-02, but can work with ARF-01 as well. Sold in a 2-pack. Fits standard size servos.
High quality black anodized aluminium servo mechanical advantage bracket. Perfect for making an indirect drive axis using the Ball Bearing Hub and other components. Sold in pairs. Fits standard size servos.
Product Code: ASB-21
Mechanical Advantage Brackets (2)
Aluminum Micro-Servo Rotate Bracket Single Pack
High quality black anodized aluminum micro-servo rotation bracket. Works great for making a light weight wrist rotate for a robotic arm. Sold in a single pack. Fits standard size servos, with an HS-85BB or HS-85MG micro-servo for rotation.
These aluminium brackets are designed to connect two Multi-Purpose servo brackets.
Product Code: ASB-18
Aluminium Interconnect Brackets (2)
Aluminum Channel - 6" Single Pack (Brushed)
High quality brushed Aluminium multi-purpose "U" channel. Works great for making larger assemblies. Connect any of the Servo Erector Set brackets, hubs, and accessories with their 2-56 hardware. Can be drilled for 3mm or 4-40 hardware. Made with .094" Aluminium.
Product Code: ASB-506B
Aluminum Channel - 6" Single Pack (Brushed)
Aluminium Channel - 5" Single Pack (Black)
High quality black-anodized Aluminium multi-purpose "U" channel. Works great for making larger assemblies. Connect any of the Servo Erector Set brackets, hubs, and accessories with their 2-56 hardware. Can be drilled for 3mm or 4-40 hardware. Made with .06" Aluminium.
Product Code: ASB-505
Aluminium Channel - 5" Single Pack (Black)
Aluminium Channel - 3" Single Pack (Black)
High quality black-anodized Aluminium multi-purpose "U" channel. Works great for making larger assemblies. Connect any of the Servo Erector Set brackets, hubs, and accessories with their 2-56 hardware. Can be drilled for 3mm or 4-40 hardware. Made with .06" Aluminium.
These hubs allow any of our tubing sections (AT-01 thru AT-06) to be attached directly to a Hitec servos output shaft. There are lots of interesting uses for this unique hub.
Low Profile Axis (LPA-01) includes a brushed aluminium bracket, Acetal gears, and a Ball Bearing Hub (BBH-01). This makes a very strong pivot while only adding 0.486" to the length. It works great with all of our other brackets and hubs. Easily add waist rotate to a biped, a sixth DOF to a Biped leg, or wrist rotate to a robotic arm. This part makes many interesting and unusual mechanical assemblies possible.
Product Code: LPA-01
Low Profile Axis (no servos)
Servo MXL Timing Belt Pulley - 32 Tooth (no servos)
Imagine the possibilities of being able to attach an MXL Timing Belt to a servo. Gear reduction, linear actuation, load sharing, and much more can easily be acomplished. MXL (Miniature Extra Light) Pitch is 0.08". Pitch diameter is 0.815". Overall diameter is 1.0". Belt thickness of 1/8", 3/16", and 1/4" will work. Fits the Hitec spline.
These parts mate to the HUB-09 and the BBH-01. When used with these parts a light but very strong tubing pivot can be made. They can also be used to make a heavy duty servo horn adaptor.
This ball bearing hub can be used with the HUB-09 and the ASB-19 to make a light weight but very strong tubing pivot. It is also used in the Low Profile Axis
Injection Molded Servo Hinge Two Pack - Standard (HD)
High quality, heavy duty injection molded hinges attach to the bottom of a servo directly inline with the output shaft. Useful for making custom parts that do not require ASB-04 brackets. Sold in a 2-pack. Fits standard size servos. Used with ASB-03 and ASB-05 only. Spacing from servo horn to servo hinge is 1.875".
High quality, heavy duty injection moulded hinges attach to the bottom of a servo directly inline with the output shaft. Sold in a packs of two, fits any standard size servos. Spacing from servo horn to servo hinge is 1.875". Note, does not include ball bearings, they are included with the "C" brackets above.
This rugged, lightweight, Sharp IR Sensor Panner allows you to mount three Sharp IR Sensors and pan them around using a servo. Using a standard 180 degree servo, you can acheive a scanning range of 270+ degrees. The angle between each sensor is 45 degrees.
Perfect for translating mechanical motion from one surface to another. The ball has a 2–56 x 1/4" threaded stud. The nylon ball socket accepts 2/56 threaded rod.
We supply educational Robotics Kits, Hobby Robots, Programmable Robots, and Robot Controllers. Also advanced Motor Controllers for Robots, Robot Sensors, Accessories and Robot Books. Robot Wars