Multiplex RHINO digi 4

The Rhino digi 4 is a super strong servo suitable for applications requiring high power.

The RHINO digi features a generously dimensioned metal gearbox with a steel output gear and 8 mm splined output shaft. The integral aluminium heat-sink provides effective cooling of the motor and electronics. The servo case is fitted with sealing rings to prevent the ingress of dust and moisture.

TITAN MG digi 4 servo

The TITAN MG digi is based on the proven TITAN digi servo, but features an ultra-robust metal gearbox. The gearbox is optimised for maximum torque, as the servo is designed primarily for use in models where high shock resistance and great power are required, combined with good transit speed.

Tiger Karbonite

High performance standard analogue servo offering outstanding value for money, the Tiger KARBONITE is a fast, strong servo suitable for many applications. With those who demand accuracy and minimum gear transmission play, the KARBONITE technology is extremely wear resistant when compared to conventional plastic gearboxes. This results in a high gear life span with durability and minimum gear wear.

Torque: 4/5 cells 6.12/7.65kg.cm

Tiger MG Digi 4
Metal Gear Digital Servo

High–quality 20 mm digital servo. Identical to the Tiger MG servo, but with digital technology for maximum accuracy and holding power, and optimum running characteristics.

Supplied with high-quality cable of large cross sectional area (0,33 mm2), with gold-plated connector contacts and heavy duty plastic output lever.

POLO digi 4 servo
Micro Ballraced

All-purpose digital servo; part of the new MULTIPLEX digi4 range of digital servos.

Robust construction, ballraced output shaft and metal gears ensure good shock rejection. Digital technology provides high holding power combined with minimal angular error and accurate repeat positioning for maximum precision of control.

Servo Output Arm ALU 2-Arm

With 6 mm spline socket, matching the Super-FL, Micro, Royal, Profi and Power servo ranges.

M3 thread (spacing A 10 / B 15 / C 20 mm)

Servo Output Arm ALU 2-Arm

With 6 mm spline socket, matching the Super-FL, Micro, Royal, Profi and Power servo ranges.

M3 thread, for ball-end bolts Short (spacing A 10 / B 14 / C 18 mm)

Spline Metal Servo Horn
(Tapped)

This high quality metal servo horn has the standard Servo Bracket hole pattern and is tapped to accept 2-56 screws. It fits on all our Hitec & Multiplex (excluding Rhino) resin, carbonite, and metal final gears.

Diameter = 24mm (approx.)

Know somone who might be interested? Share it with them!