The ease of use of the ES3000 Industrial Interface boards allows their rapid incorporation into almost any project.
The Industrial interface increases the electrical operating range and robustness of the Easy Step 3000 module (Pre-fitted with ES3PRO) in addition to adding screw terminal type connectivity.
Supplied with PC Interface software making the building and control of a final application simple and quick.
This Interface board allows the ES3000 to be easily used in final applications or as part of the development process, allowing ease of connectivity.
Product Code: ES3IIB
Easy-Step™3000 Industrial Interface
The Easy-Step 3000 Industrial Interface (ES3IIB) is an advanced stepper motor drive and control system that will support unipolar stepper motors up to 35V and 3 Amps per phase.
Features (Also see ES3000 documentation)
Small footprint
Unipolar motors to 35V, 3.0A
Drive Unipolar Stepper Motors in Full 2 Phase, Full 1 Phase and Half Step
Simple clearly marked connections
Motor connections via screw terminal or 6 pin plug-in header
Motor phase coil 'electrical noise' suppression
Extended 'Logic supply' voltage input range - 6.5 to 30VDC
Logic supply reverse polarity protected
Input protection and filtering on IP1-5 and in/out
Transient voltage suppression on Logic supply input
Current protected 5V output/input
Power LED (Orange = indicates 5V is Healthy)
5V PSU over current fault LED (100mA trip level, self re-setting)
Download Assistance: To download a document, either left click on the text link adjacent to the document, or right click on the link and choose "Save Target As" then choose a destination on your computer for the document. A free Adobe Acrobat Reader can be downloaded
from Adobe (size 8.5Mb - about 30 minute download on a 56k modem)
Know somone who might be interested? Share it with them!
