Click to enlarge

Breadboard
Mini Self-Adhesive

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield shown below. Strong, self-adhesive backing. Measures 1.8"x1.4

Please choose the colour you would like for your breadboard in the shopping basket.

Click to enlarge

Breadboard Power Supply Stick 5V/3.3V

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.

Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V).

The two pairs of GND and VCC pins are spaced such that when connected to the sparkfun basic breadboard both power busses will be powered.

more information & downloads

Click to enlarge

Breadboard Power Supply USB - 5V/3.3V

A very simple breadboard power supply kit that takes power from any USB port and outputs a fuse protected and regulated 3.3V. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled 5V/GND 3.3V/GND plug directly into the power lines.

MORE INFORMATION & DOWNLOADS

Click to enlarge

Breadboard Power Supply 5V/3.3V

A very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage.

The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard.

Pins labeled VCC and GND plug directly into the power lines.

The lone pair of pins have no electrical connection but help support the PCB

MORE INFORMATION & DOWNLOADS

ProtoBoard - Square 1" Single Sided

This is a very simple but extremely handy, 1" square, single sided perf board. Standard 0.1" spacing with a 4-40 (3mm) hole for mounting.

Every three holes are connected with a 20mil trace.

Package of 2

Click to enlarge

Jumper Wires Premium M/M

This is a SparkFun exclusive! These are 100mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of ten jumpers (colors shown).

Dimension: 100mm long

Click to enlarge

Jumper Wires Premium F/F

This is a SparkFun exclusive! These are 100mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of ten jumpers (colors shown).

Dimension: 100mm long

Know somone who might be interested? Share it with them!