|
| ||
| Home | Contact | Courses | Phidgets | Sensors | Robot Kits | Parallax | Motors & Wheels | Books | LEGO for Schools | Help | Manufacturers |
|---|
ISO 9001 : 2000 
|
|
|
||||||||||||||||||||||||||||||||||||||||||
 |
4WD Chassis (6 Products) - The Lynxmotion 4WD Robot Kit’s are robust, modifiable, and expandable chassis for your RC or autonomous robot experimentation. By utilizing popular RC truck tires and wheels the robot has excellent traction. The motors can be installed for low COG or high ground clearance, for indoor or outdoor use. |
 |
Tri Track Chassis Kit - The Tri-Track Chassis Kit uses the popular triangular track differential drive system and also contains a wiring harness and battery connector |
 |
Hexapod Body (3 Products) - This chassis is used in the AH3–R, BH3–R and CH3– Lynxmotion robots. The laser–cut Lexan panels and aluminum standoffs make a nice round Hexapod robot chassis for use with any of the 3DOF SES legs. It has mounting hardware to hold a Bot Board and SSC-32. The chassis is supplied in black Lexan. |
 |
Biped Torso (3 Products) - Biped Scout Robot chassis only no servos or electronics. The biped legs feature 6 degrees of freedom. This product includes everything you need to build a robot to control using your own servos and electronics. Precision laser cut Lexan structural components, custom injection molded components. Custom anodized aluminum mechanical hardware. |
 |
Robot Kits (6 products) - The AH3-R robot's round body symmetry makes this a very unique hexapod walker. The three DOF (degree of freedom) leg design provides the flexibility required to walk in any direction! The robot uses 18 HS-475 servos for the legs. The combo kit includes everything you need to make a fully functional robot except batteries. |
 |
Robotic Arms (5 products) - The Lynxmotion robotic arms deliver fast, accurate, and repeatable movement. The robot features base rotation, shoulder, elbow and wrist motion, and a functional gripper. The Lynx robotic arm is an affordable robust system with a proven design that will last and last. Everything needed to assemble the robot is included in the kit. |
 |
Robotic Legs - This 3DOF (degree of freedom) leg design is the most rugged available. It's popular with Hexapod and Quadrapod robot builders. The all aluminum construction even incorporates ball bearings in each joint. Made from the highest quality aluminium alloy. All required hardware is included. Finish is brushed aluminium. |
 |
Lynx Gripper Kits (2 products) - Improve the performance of your old arm, improved operation over pushrod style grippers, includes Precision laser cut lexan components, mechanical hardware Hitec HS–81 servo. Specifications Servo motion control = local closed loop Gripper opening = 2” Servo voltage = 6 vdc Easy to assemble and install. |
 |
SSC-32 Servo (2 Products) - The SSC-32 (serial servo controller) is a small preassembled servo controller with some big features. It has high resolution (1uS) for accurate positioning, and extremely smooth moves. The range is 0.50uS to 2.50uS for a range of about 180°. The motion control can be immediate response, speed controlled, timed motion, or a combination. |
 |
Bot Board II -Introducing the Bot Board II, the best carrier board for the Basic Atom, or any other 24 or 28 pin microcontrollers. It's perfect for controlling your small robotic projects. It has an onboard speaker, three buttons and LED's, a Sony PS2 controller port, a reset button, logic and servo power inputs, an I/O bus with power and ground, and a 5vdc 250mA regulator. |
 |
Wireless Analog Controller - This 2.4ghz wireless Play Station 2 style controller works perfectly with any of our Bot Board / Basic Atom 28 equipped robots. Up to four of them can be used at the same time. They have a range of 10 meters, more when used outdoors. |
 |
Geared Motors (11 products) - A range of popular high performance 12 volt and 7.2 volt DC geared motors suitable for driving small robots. These motors are ideal for use with a wide range of motor controllers. Supported by a range of mounting brackets and hubs suitable for use with the geared motors with 4mm & 6mm shafts sizes. |
 |
Gearmotor Hardware (5 products) - High quality machined-alloy universal hubs, suitable for use with any motors with 4mm or 6mm shafts, these heavy-duty aluminium hubs make quick work of connecting wheels and mechanical loads to either 4mm or 6mm shafts. These brackets are useful for making your own arms and legs with ball bearings. Sold in a 2-pack, fits standard size servos. |
 |
Tracks & Sprockets (5 products) - These polypropylene / rubber tracks are perfect for your small robot project. They are rugged, lightweight, reliable. These tracks will not slip from the sprockets. They are extremely smooth and quiet and have very little friction. |
 |
Servo Hardware (28 products) - High quality, black anodized aluminium "C" bracket with ball bearings suitable for use with multi-purpose servo brackets or heavy duty servo hinge sold separately. These brackets are useful for making your own arms and legs with ball bearings. Sold in a 2-pack, fits standard size servos. |
 |
Custom-Hardware (17 products) - These components are extremely versatile, making virtually any mechanical arrangement possible. It's now possible to build custom robots to your specifications! The ball bearings provide for precise low friction movement. The tubing, hubs and hub connectors are precision fit and really expand what is possible to build. |
 |
Metal Servo Horn - This high quality metal servo horn has the standard Servo Bracket hole pattern and is tapped to accept 2-56 screws. It fits on all our Hitec & Multiplex (excluding Rhino) resin, carbonite, and metal final gears. |
 |
Sensors (3 products) - A range of line detection and proximity detectors, from Lynxmotion, that can be attached to a sumo, or other mobile robot. These sensors deliver a stable TTL compatible high or low voltage. |
| Copyright © Active Robots Ltd. 2003 - 2010 | |
- Our range of Lynxmotion products.