Rouge Robotics
Click to Enlarge
|
rMP3 - Playback Module
The rMP3 module allows designers to integrate high quality MP3 playback into designs with an easy to use TTL serial protocol.
Sound files such as voice prompts, sound effects, and music can be played using the rMP3. MP3 playback can be CBR (Constant Bit Rate), or VBR (Variable Bit Rate) up to 48 KHz at 320 Kbps. MP3 files are stored on SDHC, SD or MMC cards, in a format readable by your PC. PCM (WAV) files and IMA ADPCM files can also be played
more information & downloads |
|
Product Code: APRMP
rMP3 - Playback Module
|
Click for larger image
Reverse View
SD/MMC card not included
|
uMP3 Playback Module
The uMP3 ("micro MP3") module allows OEM designers and hobbyists to integrate high quality MP3 playback into projects with an easy to use TTL serial protocol.
The uMP3 module also has a multi-function 10-pin connector that operates in either direct sound playback(8 configured files or playlists) or pushbutton player mode (play, stop, fwd, etc).
Each module has a stereo headphone jack for headsets (16ohm+) and a mono 325mW amplified speaker connector.
The module has 1MByte of on-board flash storage and a connector on the reverse side for SD/MMC cards in FAT16/32 format up to 1GB in size (media limitation only). MP3 playback is CBR or VBR, and up to 48 KHz at 320Kbps.
|
|
Product Code: uMP3
uMP3 Playback Module
|
Datasheets for uMP3
|
Click for larger image
Reverse View
|
uMMC Storage Solution
The uMMC is a compact data storage device for the rapid integration of FAT16/32 SD or MMC card storage for OEM and hobbyist use.
Using the easy to use TTL serial interface you can read and write data to SD and MMC cards in PC compatible FAT16/32 formats (previously formatted by PC) in sizes from 8MB up to 512MB.
The serial interface is easy to use from both simple and advanced processors so you can easily add large storage capacity to your next Stamp™, PIC or AVR project to name a few.
SD/MMC cards not included
ummc data storage datasheet |
|
Product Code: uMMC
Data Storage Module
|
Click for larger image
NOTE: an external USB board (such as the SparkFun™ FTDI Basic Breakout - 5V [DEV-09115]) is required to communicate with the rDuino LEDHead.
|
rDuino LEDHead
rDuino LEDHead is our first offering in Arduino™ compatible controller boards. The rDuino - LEDHead is the first in a series of special market Arduino™ compatible, Atmel microcontroller boards from Rogue Robotics. The LEDHead is an Atmel ATmega644P based board which provides full shield support while adding more I/0 and 8 dedicated LEDs. Running at 16 MHz, and with an onboard TWI controlled Real Time Clock (RTC), the unit is designed to provide control for data storage and audio solutions with the rMP3 Playback module as a full solution for data logging and/or audio playback.
more information & downloads |
|
Product Code: BB-RLH
rDuino LEDHead
|
Download Assistance: To download a document, either left click on the text link adjacent to the document, or right click on the link and choose "Save Target As" then choose a destination on your computer for the document. A free Adobe Acrobat Reader can be downloaded
from Adobe (size 8.5Mb - about 30 minute download on a 56k modem)
|
Know somone who might be interested? Share it with them!
|
|
|
Copyright © Active Robots Ltd. 2003 - 2010
|
|
|
