While voltage is applied to the motor V+ and ground leads, the actuator extends. If the polarity of this voltage is reversed, the actuator retracts.
- Stroke: 30mm
- Gear Ratio: 50:1
- Voltage: 6V
Actuator stroke position may be monitored by providing any stable low and high reference voltages on leads 1 and 5, and then reading the position signal on lead 2.
The voltage on lead 2 will vary linearly between the two reference voltages in proportion to the position of the actuator stroke.
Stroke: 30mm
Gear Ratio: 50:1
Voltage: 6V