Actuator L12-100-210-6P

These miniature linear actuators have an internal potentiometer that can be used to provide position feedback. They do not have any internal controller. Lower gear ratios have higher speed but less force. Higher gear ratios have higher force but are slower.

• Stroke: 100mm
• Gear Ratio: 210:1
• Voltage: 6V

While voltage is applied to the motor V+ and ground leads, the actuator extends. If the polarity of this voltage is reversed, the actuator retracts.

Actuator stroke position may be monitored by providing any stable low and high reference voltages on leads 1 and 5, and then reading the position signal on lead 2. The voltage on lead 2 will vary linearly between the two reference voltages in proportion to the position of the actuator stroke.

Stroke: 100mm
Gear Ratio: 210:1
Voltage: 6V

See Downloads for Technical Specification