Bipolar 48mm Stepper

Product Code: 3302

Availability: In stock

Excl. VAT: £14.42 Incl. VAT: £17.30

Buy 5 at £12.29 (£14.75 incl. VAT) each and save 15%
Buy 10 at £12.00 (£14.40 incl. VAT) each and save 17%
Buy 25 at £11.51 (£13.81 incl. VAT) each and save 21%
Buy 50 at £11.22 (£13.46 incl. VAT) each and save 23%

Qty:

Add to Wishlist

This motor is a larger NEMA-17 motor that produces a whopping 4800g-cm of holding torque and fine resolution. The motor is also very efficient in converting current into torque and velocity.

Very High Torque, Fine Resolution
NEMA-17 Bipolar 4-wire
Step angle: 0.9°
Holding Torque: 4800g-cm @ 2.4 Amps

Step Angle 0.9°
Step Accuracy 5%
Holding Torque 4800g-cm / 66.66 oz-in
Coil Resistance 1 Ohm
Rated Current 2.4A Motor
Length 48mm
Mounting Plate
Size Nema-17
Shaft Diameter 5mm
Weight 362g
Number of Leads 4

The 3302 stepper motor connects to the 1063 - PhidgetStepper Bipolar 1-Motor.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

Wire Color	Black	Green	Red	Blue
Board Connector	A	B	C	D

Note: Make sure to unplug the power cord from the 1063 before switching wires around.

Mechanical Drawing Size: (16.72 KB)

3302 Technical Documentation Size: (255.86 KB)

Additional Information

Video	No

<ul> <li>Step Angle 0.9° </li> <li>Step Accuracy 5% </li> <li>Holding Torque 4800g-cm / 66.66 oz-in </li> <li>Coil Resistance 1 Ohm </li> <li>Rated Current 2.4A Motor </li> <li>Length 48mm </li> <li>Mounting Plate </li> <li>Size Nema-17 </li> <li>Shaft Diameter 5mm </li> <li>Weight 362g </li> <li>Number of Leads 4</li> </ul>Move your mouse over image or click to enlarge

BASKET

You have no items in your shopping cart.

Bipolar 48mm Stepper

Additional Information

Active Robots

Popular Products

Customer Service

More Info