URG-04LX-UG01

HOKUYO URG-04LX-UG01 Laser Range Finder

Only 1 left
£1,088.40 £907.00

The URG-04LX-UG01 is the smallest and lightest LRF available.

With a single USB connection it is ideally suited to students and researchers who are involved in robotics.

  • Indoor Environments

 

Or

The Hokuyo URG-04LX-UG01 Scanning laser range finder is a low cost, compact, and accurate laser scanner designed for robotic applications.

The URG-04LX-UG01 is able to report ranges from 20mm to 5600mm in a 240° arc (0.36° angular resolution). Its power consumption, 5V DC, 2.5W, makes it the natural choice for battery operated vehicles. The range finder is supplied with diagnostic software and sensor cable.

  • 5.6 Meters Range
  • 240° scan 0.35° resolution
  • 10 scans per second
  • Compact 50 x 50 x 70mm
  • Lightweight 160g
  • Low Power 5v DC, 2.5W

Specifications

Model Number URG-04LX-UG01
Power Source 5VDC±5% (USB Bus power)
Light source Semiconductor laser diode (λ=785nm), Laser safety class 1
Measuring area 20 to 5600mm (white paper with 70mm×70mm), 240°
Accuracy 60 to 1,000mm : ±30mm, 1,000 to 4,095mm : ±3% of measurement
Angular resolution Step angle : approx. 0.36° (360°/1,024 steps)
Scanning time 100ms/scan
Noise 25dB or less
Interface USB2.0/1.1 [Mini B] (Full Speed)
Command System SCIP Ver.2.0
Ambient illuminance*1 Halogen/mercury lamp: 10,000Lux or less, Florescent: 6000Lux (Max)
Ambient temperature/humidity -10 to +50 degrees C, 85% or less (Not condensing, not icing)
Vibration resistance 10 to 55Hz, double amplitude 1.5mm each 2 hour in X, Y and Z directions
Impact resistance 196m/s2, Each 10 time in X, Y and Z directions
Weight Approx. 160g

*1 - These products are only for indoor applications. Strong sunlight may cause error output.

Applications

Technology frontier and No.1 market share in Japan for service robots! Wide applications, from robot vision sensor to Automatic Material Handling System(AMHS).

External Dimensions

Hokuyo URG-04LX-UG01 External Dimensions 
Connection

During booting, 500mA current is required. If the sensor can not be started with a single USB port, please use 2 USB cables (not included) for power supply from 2 USB ports. Please connect to 2 independent USB ports which can supply 500mA.

attention!PC's motherboard could be broken if the sensor is connected to the USB ports which are not able to supply 500mA×2.

attention!The GND lines connected to the USB are all shorted.