+44 (0) 1761 234 328

(0) items

€0.00

You have no items in your shopping cart.

Controllers

A controller is a device which takes one or more inputs and adjusts its outputs so a connected device functions in a controlled manner. We offer a wide range of controllers from simple motor controllers to advanced microcontrollers that can be tasked with multiple control outputs and perform closed-loop control. Different actuators require differing control methods to achieve stable output, choosing an appropriate controller is therefore important to the final operation of your project.

We have an array of microcontrollers including the widely used Arduino and Basic range and the recently hugely popular Raspberry Pi. For motor control we have specific solutions for DC motors, Servos and Uni-Polar and Bi-Polar Stepper motors, for other high current applications we have a range of relays to allow high power actuators to be controlled

1 to 10 of 398 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Roboteq MBL1660A Single Channel, Brushless, 120A, 60V, FOC

    Roboteq Single, Brushless, 120A, 60V, Field Oriented Control

    Product Code: MBL1660A
    Excl. VAT: €421.76 Incl. VAT: €506.12

    The MBL1660A is enabled for sensorless control, Hall sensors will not be required to drive a BLDC motor with this controller.  This version of the MBL is also equipped with Field Oriented Control and will measure motor current as well as battery current to give more accurate and stable torque control and sinusoidal control.

    Roboteq’s MBL1660 is a high-current controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motor’s 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor or encoder input information to compute speed and measure travelled distance inside a 32-bit counter.  The motor may be operated in open or closed loop speed mode.

    Read more

    Add to Compare
  2. RoboClaw 2x15A Motor Controller

    RoboClaw 2x15A Motor Controller

    Product Code: IMC412
    Excl. VAT: €87.39 Incl. VAT: €104.87

    The RoboClaw 2x15A motor controller by Ion Motion Control can supply two brushed DC motors with 15 Amps continuous and up to 30 Amps peak.

    With its multi mode interface it can be controlled from USB, RC radio, serial devices, analog and or microcontrollers such as an Arduino or Raspberry Pi.

    Read more

    Add to Compare
  3. RoboClaw HV 2x160A, 60VDC Motor Controller

    RoboClaw HV 2x160A, 60VDC Motor Controller

    Product Code: IMC426
    Excl. VAT: €563.49 Incl. VAT: €676.19

    The RoboClaw 2x160AHV is an intelligent high power motor controller designed to control two brushed DC motors. Built to withstand high current at high voltages it supports a peak of 160 Amps per channel with an input voltage of up to 60VDC.

    It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi.

    Read more

    Add to Compare
  4. RoboClaw HV 2x120A, 60VDC Motor Controller

    RoboClaw HV 2x120A, 60VDC Motor Controller

    Product Code: IMC422
    Excl. VAT: €471.49 Incl. VAT: €565.79

    The RoboClaw 2x120AHV is an intelligent high power motor controller designed to control two brushed DC motors. Built to withstand high current at high voltages it supports a peak of 120 Amps per channel with an input voltage of up to 60VDC.

    It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi.

    Read more

    Add to Compare
  5. SparkFun Stepoko (front)

    SparkFun Stepoko

    Product Code: ROB-13155
    Excl. VAT: €140.86 Incl. VAT: €169.04

    The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to accept stepper motor commands.

    The Stepoko’s design and firmware are completely open source and it works with an open source Java based cross platform G-Code sending application to translate commands.

    Read more

    Add to Compare
  6. Acrylic Case for BeagleBone Green empty

    Acrylic Case for BeagleBone Green

    Product Code: 322010189
    Excl. VAT: €6.04 Incl. VAT: €7.25

    The enclosure provides  slots to access the Grove, USB ports, Ethernet, SD card, HMDI, and JTAG connectors as well as feet ,and vents to ensure the board gets proper cooling

    Read more

    Add to Compare
  7. SeeedStudio BeagleBone Green top

    SeeedStudio BeagleBone Green

    Product Code: 102010027
    Excl. VAT: €57.71 Incl. VAT: €69.25

    SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version.

    Read more

    Add to Compare
  8. Grove – Mini Track Ball top side

    Grove – Mini Track Ball

    Product Code: 101020091
    Excl. VAT: €18.40 Incl. VAT: €22.08

    If you need a mini controller for your robot, this product will be what you need.

    Read more

    Add to Compare
  9. Grove - I2C Mini Motor Driver top

    Grove - I2C Mini Motor Driver

    Product Code: 105020010
    Excl. VAT: €12.41 Incl. VAT: €14.89

    The Grove – Mini I2C motor driver is a very tiny motor driver with I2C interface

    Read more

    Add to Compare
  10. 2.4 Ghz RF Multi Channel Remote for 2 Dc Motors PLAN VIEW

    2.4 Ghz RF Multi Channel Remote for 2 Dc Motors

    Product Code: RKI-1685
    Excl. VAT: €36.56 Incl. VAT: €43.87

    Make your robot wireless with RF 2.4GHz coded Remote control.

    Read more

    Add to Compare

1 to 10 of 398 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Controllers

Minimal Price: 1.32

0
Post your comment

Active Robots