+44 (0) 1761 234 328

(0) items


You have no items in your shopping cart.

Easy-Step 3000 Professional

Product Code: ES3PRO
Excl. VAT: £60.00 Incl. VAT: £72.00
You will earn 60 Robo Points for buying this product

The Easy-Step™ 3000 (ES3000) is an advanced stepper motor drive and control system that will support unipolar stepper motors up to 35V and 3 Amps per phase.

Its small physical size makes it ideal for incorporating in robots and other industrial control equipment.

  • Small footprint only 63.6 x 26.4 mm
  • Up to 35Volts and 3 Amp per phase
  • Drive Unipolar Stepper Motors in Full 2 Phase, Full 1 Phase and Half Step
  • Easy to use Command SetEasy to use Command Set
  • 4 Modes of operation:
    - Direct Command Set (via PC serial comms)
    - Slave/Remote - Pulse Mode (Step and direction pin inputs)
    - Voltage Mode (Analogue Voltage pin input)
    - Teach Mode (via PC serial comms)
  • Store and Replay Facility (Pro Version Only)
  • Smooth Acceleration
  • Selectable Pull in rate and Maximum step rate
  • Adjustable ramp time to suit varying loads/motors/operating voltages
  • Separate winding supplies to allow "forcing" resistors
  • On board 5V regulator for logic power supply
  • RS232 and TTL logic level data IN⁄OUT
  • Built-in Demonstration Routine
  • PC Based program "EASY STEP™ ISP" to allow setting up/control of motors
  • 5V logic supply available for external potentiometer (10mA Max)
  • Status/Mode/Power LED
  • Industry Standard 0.1" (2.54mm) Gold Plated Connectors
  • Current position register +⁄– 100,000,000,000 steps
  • Home and mark position registers
  • Absolute and Relative move commands
  • Busy logic output
  • Stop with motor coils On or Off
  • ES3000 Stepper Motor Controller
  • PC Serial Communications Lead
  • Logic Supply Battery Snap
  • PC ISP (Interactive System Programmer)
  • User Reference Guide
  • Serial Communications Protocol

Product Attachments

View FileES3000 User Guide V1.05    Size: (1.19 MB)
View FileES3000 FAQ    Size: (75.89 KB)
View FileES3000 Serial Com. Protocol V1.03    Size: (276.04 KB)
View FileES3000 ISP Program - 1 click web install    Size: (3.35 KB)
View FileES3000 ISP Program (SETUP.EXE)    Size: (7.64 MB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

Easy-Step  3000 Professional
Post your comment

Active Robots