+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

Synapse RF200PD1 with SMA Connector

Product Code: 51768
Excl. VAT: £24.50 Incl. VAT: £29.40
You will earn 24 Robo Points for buying this product

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and an SMA antenna connector for optimum performance.

XBee is good; Synapse is just better. More I/O, embedded python, and generally better range at comparable cost! Synapse Wireless provides reliable RF Engines®that support a range of frequencies and bandwidths. These small, low-power, transceiver modules, commonly run in the 915MHz & 2.4GHz spectrums, have a maximum extended range of up to three miles LOS (Line-Of-Sight) and the lowest power consumption in the industry. These RF Engines come pre-loaded with the SNAP® network operating system which allows the nodes to be natively mesh networked. Typical applications include wireless serial port(s), sensor monitoring, actuator control, or an intelligent embedded controller - the possibilities are limitless. Synapse takes 802.15.4 Zigbee/XBee style communication one step further, and makes it smart.

This particular RF module includes a user programmable (via python-based scripts), embedded ATmega128RFA1 microcontroller that can be programmed for all kinds of applications including remote sensor monitoring, mesh networking, and/or peripheral activation.  Other notable features include: very high communication speeds (up to 2Mbps), large transmission range (up to 3 miles LOS at 250Kps with SMA antenna), wide Low voltage TTL operating range (1.8 - 3.6V), 7 Analog-to-Digital Inputs, 6 PWM Outputs, 9 Interrupt capable pins, I2C (TWI), SPI, 2 x UARTs, & amazingly low power capabilities (1.6uA sleep current).

SMA antenna not included but can be purchased seperately.

Feature List:

  • RF100 footprint & pinout compatible
  • Embedded ATmega128RFA1 on-board
  • 2 x UART ports for LVTTL serial control or transparent data
  • Able to be configured to wirelessly program Arduino Uno & Mega 2560
  • Socket-able (2mm spacing) or solder-able
  • SNAP, instant-on, self-healing, mesh network operating system
  • 802.15.4 Protocol at 2.4GHz
  • Maximum range performance: 3 mile outdoor range (LOS) at 250kbps
  • 24 pins, with 20 general purpose I/O, 7 of which can be 10-bit A/D inputs
  • 6 pins configurable for PWM, and 9 Interrupt capable pins
  • I2C communication (Pins 19, 20)
  • SPI communication (Pins 14, 15, 16)
  • JTAG communication (Pins 17, 18, 19 , 20)
  • 128k flash memory (58.5k available for user applications)
  • Embedded Python
  • Can be used stand-alone (no additional microcontroller required)
  • Low power mode of 1.6uA with internal timer running
  • Supply voltage: 2.7V~3.6V
  • Transmit Current: 80mA (Typ)
  • Receive Current: 20mA
  • Sleep Current: 1.6uA
  • FCC certified on all 16 channels (2.4GHz)
  • Spread spectrum (DSSS) technology resists noisy environments

Product Attachments

View FileSynapse Product Resources    Size: (2.67 MB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

Synapse RF200PD1 with SMA Connector
0