+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

3526_0 Inductive Proximity Sensor 4mm

Product Code: 3526
Excl. VAT: £25.84 Incl. VAT: £31.01
  • Buy 5 for £23.37 (£28.04 incl. tax) each and save 10%
  • Buy 10 for £22.80 (£27.36 incl. tax) each and save 12%
  • Buy 50 for £21.21 (£25.45 incl. tax) each and save 18%
  • Buy 100 for £19.95 (£23.94 incl. tax) each and save 23%
You will earn 25 Robo Points for buying this product

Proximity sensors are the most common and affordable solution for no-touch object detection.


The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face.

This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of metal being detected and will in general be between 70 to 80% of the standard distance.

 

Product Features

  • Detects Metallic objects
  • Standard Detecting Distance: 4mm
  • Normally Open
  • DC wire output
  • Requires a 12 to 24VDC Power Supply

 

This sensor connects to a Digital Input on any of the following products:

  • 1018 - PhidgetInterfaceKit 8/8/8
  • 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
  • 1202 - PhidgetTextLCD
  • 1203 - PhidgetTextLCD
  • 1070 - PhidgetSBC
  • 1012 - PhidgetInterfaceKit 0/16/16
  • 1060 - PhidgetMotorControl LV
  • 1063 - PhidgetStepper Bipolar 1-Motor

 

This is how you connect the 3526 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:

  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3526 Brown wire.
  • Connect the 3526 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3526 Blue wire to the Digital Input Ground connector on the 1018.

 

Note: When the 3526 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).

For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1070, 1060 and 1063 all accept external power.

 

Comes packaged with:
  • Mounting Hardware Kit

CharacteristicValue
Detecting Distance 4mm
Hysteresis Max. 10% of detecting distance
Setting Distance 0 to 2.8mm
Power Supply 12 - 24 VDC
Current Consumption Max 10mA
Response Frequency 400Hz
Operating Indicator Red LED
Cable Length 2m
Ambient Temperature -25 to +70°C
Ambient Humidity 35 to 95%RH
Protection Circuit Reverse polarity, surge, overload & short circuit
Protection IEC IP67

Product Attachments

View File3523 Lanbao Datasheet    Size: (217.06 KB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

3526_0 Inductive Proximity Sensor 4mm
0