+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

1024_0 Phidget RFID Read-Write

Product Code: 1024
Excl. VAT: £54.72 Incl. VAT: £65.66
  • Buy 5 for £50.89 (£61.07 incl. tax) each and save 7%
  • Buy 10 for £46.51 (£55.81 incl. tax) each and save 16%
  • Buy 40 for £42.37 (£50.84 incl. tax) each and save 23%
  • Buy 80 for £38.30 (£45.96 incl. tax) each and save 31%
You will earn 54 Robo Points for buying this product

The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing data to T5577 tags is also supported.



  • Reads tags brought within 3 inches of the reader

  • Supported Protocols: EM4100 Series, ISO11785 FDX-B, PhidgetTag

  • On-Board LED

  • Provides 2 Digital Outputs to drive LEDs, relays, etc.

  • Writes to T5577 tags

  • Includes 3018 - 180cm Mini-USB Cable, and hardware mounting kit.

The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing data to T5577 tags is also supported.

RFID (radio frequency identification) systems use data strings stored inside RFID tags to uniquely identify people or objects when their tags are scanned by an RFID reader. These types of systems are found in many applications such as passport protection, animal identification, inventory control systems, and secure access control systems.

The PhidgetRFID Read-Write supports reading and writing in 3 protocols; EM4100, ISO11785 FDX-B, and PhidgetTag. The PhidgetTag protocol simply stores up to 24 ASCII characters to the tag, eliminating the necessity for a table of corresponding tag numbers and names in your program. Phidgets sells EM4100 read-only tags, and writable tags which can be programmed using any protocol. Any 3rd-party EM4100 or ISO11785 tags can be read.

Because passive tags require a strong RF field to operate, their effective range is limited to an area in close proximity to the RFID reader. The distance over which the RFID tag is usable is affected by such things as the tag shape and size, materials being used in the area near the reader, and the orientation of the reader and tag in respect to each other and in their operating environment. The smaller a tag, the closer it must be to the reader to operate.

The 1024 has two digital outputs, labeled "+5V" and "LED". These work the same as any other Phidgets Inc. digital output, except that the "+5V" output has a higher current rating. You can use these outputs to have an LED or buzzer to indicate when a tag read has occured.

The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing data to T5577 tags is also supported.

RFID (radio frequency identification) systems use data strings stored inside RFID tags to uniquely identify people or objects when their tags are scanned by an RFID reader. These types of systems are found in many applications such as passport protection, animal identification, inventory control systems, and secure access control systems.

The PhidgetRFID Read-Write supports reading and writing in 3 protocols; EM4100, ISO11785 FDX-B, and PhidgetTag. The PhidgetTag protocol simply stores up to 24 ASCII characters to the tag, eliminating the necessity for a table of corresponding tag numbers and names in your program. Phidgets sells EM4100 read-only tags, and writable tags which can be programmed using any protocol. Any 3rd-party EM4100 or ISO11785 tags can be read.

Because passive tags require a strong RF field to operate, their effective range is limited to an area in close proximity to the RFID reader. The distance over which the RFID tag is usable is affected by such things as the tag shape and size, materials being used in the area near the reader, and the orientation of the reader and tag in respect to each other and in their operating environment. The smaller a tag, the closer it must be to the reader to operate.

The 1024 has two digital outputs, labeled "+5V" and "LED". These work the same as any other Phidgets Inc. digital output, except that the "+5V" output has a higher current rating. You can use these outputs to have an LED or buzzer to indicate when a tag read has occured.

Resources:

 http://www.phidgets.com/docs/1024_User_Guide

http://www.phidgets.com/docs/RFID_Primer

http://www.phidgets.com/docs/Digital_Output_Primer

 

RFID Reader

API Object Name RFID
Antenna Resonant Frequency Min 125 Hz
Antenna Resonant Frequency Max 150 Hz
Protocol EM4100, ISO11785 FDX-B, PhidgetTag
USB Speed Full Speed

 

Electrical Properties

Available External Voltage (+5V) 5 V DC
Available External Voltage (LED) 5 V DC
Available External Current (+5V) 400 mA
Available External Current (LED) 16 mA
Output Impedance (LED) 250 Ω
Current Consumption Min 27 mA
Current Consumption Max 150 mA

 

Physical Properties

Recommended Wire Size 16 to 26 AWG
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C

 

Digital Outputs

Number of Digital Outputs 2
Digital Output Voltage Min 0 V DC
Digital Output Voltage Max 5 V DC

Product Attachments

View File1024 Mechanical Drawings    Size: (27.36 KB)
View File1024 Download 3D Step File    Size: (411.3 KB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

1024_0 Phidget RFID Read-Write
0