1012_3B

1012_3B Phidget Interface 0/16/16

£116.28 £96.90

The 1012_3 is functionally the same as the 1012_2B, but some of the specifications have changed due to components shortages changing the parts we use. See the Specifications tab for more information.

Or
Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

Digital Outputs

The Open Collector Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, so the circuit you're switching will need an external power supply.

Each output is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Comes Packaged with

Hardware

Hardware mounting kit:

 
4x M3 Bolts (2cm Length)
4x Plastic spacers (5mm Length)
4x M3 Nuts
Board
Controlled By USB (Mini-USB)
API Object Name DigitalInput, DigitalOutput
USB Voltage Min 4.6 V DC
USB Voltage Max 5.5 V DC
Current Consumption Min 14 mA
Current Consumption Max 500 mA
Available External Current 394 mA
Recommended Wire Size 16 - 26 AWG
USB Speed Low Speed
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C
Digital Inputs
Number of Digital Inputs 16
Digital Input Impedance 33 kΩ
Low Voltage Max (False) 900 mV DC
High Voltage Min (True) 4.2 V DC
Low Voltage Trigger Length Min 16 ms
High Voltage Trigger Length Min 4 ms
Digital Input Voltage Max ± 30 V DC
Digital Input Update Rate 125 samples/s
Relay Properties
Number of Relays 16
Series Resistance 50 mΩ
Open Collector Voltage Max 30 V DC
Digital Output Current Sinking Max (per channel) 2 A