+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

3336_0 86STH156 NEMA-34 Bipolar Gearless Large Stepper

Product Code: 3336
Excl. VAT: £73.97 Incl. VAT: £88.76
  • Buy 5 for £65.93 (£79.12 incl. tax) each and save 11%
  • Buy 10 for £64.32 (£77.18 incl. tax) each and save 14%
  • Buy 50 for £59.84 (£71.81 incl. tax) each and save 20%
  • Buy 100 for £56.28 (£67.54 incl. tax) each and save 24%
You will earn 73 Robo Points for buying this product

This NEMA-11 motor generates 122 kg-cm of holding torque at 4.2 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3336 has a maximum speed of 1500 RPM. The 3336 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC. The following diagrams show two connection methods: series and parallel.

Series wiring will result in higher torque when the motor is stopped or at low speeds. Parallel wiring will provide better torque at higher speeds, but less torque overall. Since the current in parallel mode is split between two paths, the current rating is doubled. 

When connecting motor wires to one another, you must solder or screw clamp them together rather than just twisting them together. 

Note: Make sure to unplug the power cord from the motor controller before switching wires around.


The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 86STH156-4208B
Step Angle 1.8°
Step Accuracy ± 5 %
Holding Torque 122 kg·cm
Rated Torque 106 kg·cm
Maximum Speed (w/1067 Motor Controller) 1500 RPM
Acceleration at Max Speed
(w/1067 Motor Controller)
15000 1/16 steps/sec²

 

Electrical Properties

Recommended Voltage 30 V DC
Coil Resistance 900 mΩ
Rated Current (Series Wiring) 3 A
Rated Current (Parallel Wiring) 6 A
Phase Inductance 8 mH

 

Physical Properties

Shaft Diameter 16 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 34
Weight 5.2 kg
Number of Leads 8
Wire Length 400 mm

 

warning Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller. 

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

3336_0 - 86STH156 NEMA-34 Bipolar Gearless Large Stepper
0